Fill Dirt in Limestone County, TX

Costs vary with source, truck size, and whether material is screened or contains organics. Expect a delivered tri-axle load of loose fill-dirt to commonly range from about $300 to $1,000 in Limestone County, depending on distance, material quality, and compaction needs. Hello Gravel requires a 3-ton minimum and will provide an exact local quote during checkout.

No, typical fill-dirt contains fines and clay so it drains much more slowly than crushed limestone or gravel. If your project needs drainage (French drains, base layers, or swales), use crushed stone or gravel bottoms with fill-dirt only as cover or structural fill, not as the primary drainage layer.

Local prices vary by supplier and quality, but delivered clean fill-dirt in Limestone County commonly runs roughly $10 to $40 per cubic yard. Exact pricing depends on hauling distance, whether the dirt contains debris or organics, and current local supply — request a quote on Hello Gravel for a precise price.

One cubic yard equals 27 cubic feet, so it covers about 324 sq ft at 1 inch depth, 108 sq ft at 3 inches, and 54 sq ft at 6 inches. For raising ground or filling low spots, plan using depth you need and add 10-20% for compaction and settling when ordering.

Fill-dirt alone is not a suitable wearing surface for driveways because it compacts and erodes and does not provide good traction. For driveways, use fill-dirt only to build or raise grades, then add a compacted base of crushed stone or limestone and a top layer designed for traffic.

Fill-dirt weight varies with moisture and composition; in Limestone County it typically weighs about 1.2 to 1.6 tons per cubic yard. Always check with your supplier for an exact estimate if you need weight for truck capacity or compaction calculations.

A common tri-axle dump truck used by local haulers usually carries about 10 to 14 cubic yards of loose fill-dirt, which can translate to roughly 12 to 20 tons depending on moisture and material type. Hello Gravel coordinates local truck sizes and will confirm the expected delivered volume and weight on your quote.

Filling a low spot with fill-dirt will raise grade but will not improve drainage; fill-dirt often holds water and may settle over time. For drainage fixes, combine a graded base of crushed stone with proper slope and subsurface drains; if you are filling deep areas, compact in lifts and consult local codes to avoid underground utilities or permitting issues.

Fill-dirt is generally cheaper per yard than crushed stone because it is often a lower-cost borrow material. However, crushed stone provides structural strength and drainage, so the right choice depends on the application — for structural bases and drainage use crushed stone despite the higher cost.

No, plain fill-dirt cannot substitute for concrete — it will compact and may rut or wash away under load. For a low-cost firm surface, consider a well-compacted gravel base with geotextile fabric or crushed stone topped with a surfacing material; these options perform much better than dirt alone.

If the material is on your private property, you may move it, but removing fill-dirt or rock from public land or someone else’s property without permission can be illegal. Always confirm ownership, local county rules, and environmental restrictions before sourcing material off-site, and check for required permits or right-of-way issues.

Possibly — adding substantial fill or changing grade can trigger county or city permits, especially if it affects drainage, floodplains, or neighboring properties. Contact Limestone County or your city building and planning department before large fills, and check utility locates in advance to avoid hitting buried services.

Hello Gravel coordinates delivery by local dump truck fleets with a 3-ton minimum and typical lead time of 2+ business days; next-day delivery is available for orders placed before noon CST for an extra fee. Tailgate spreading can be requested at checkout but is performed at the driver’s discretion; we recommend noting placement instructions and any access constraints in your order notes.

Ask whether the fill is screened, free of organics and debris, and whether it contains limestone fragments common to the region. Also confirm moisture content, whether it's been tested for contaminants, recommended compaction method, and whether the supplier can provide a Material Safety Data or provenance information if you need it for construction or permitting.