Fill Dirt in Wellington, TX

A typical tri-axle dump truck used in our network carries about 10 to 12 cubic yards of loose material, which for fill dirt in West Texas usually translates to roughly 12 to 16 tons depending on moisture and local caliche content. Exact capacity depends on the truck and how dense the local soil is, so confirm during checkout if you need a specific truck size. For orders, remember our minimum is 3 tons and you can request delivery windows at checkout.

As a rule of thumb, 1 cubic yard of fill dirt (27 cubic feet) covers about 108 sq ft at 3 inches deep. In Wellington fill dirt typically weighs about 1.2 to 1.4 tons per cubic yard, so 1 ton will cover roughly 70 to 90 sq ft at 3 inches depth. Use our online calculator or order a little extra (5-10%) to allow for settling and compaction.

Prices vary by supplier, truck size, and local availability in West Texas, so we provide upfront quotes through the Hello Gravel site for your zip code. Our marketplace reflects local rates and includes delivery options; get an instant quote or contact our team to see current pricing for Wellington. Keep in mind the minimum order is 3 tons and next-day delivery is available for orders placed before noon CST for an extra fee.

No, fill dirt is not recommended as a planting or finished landscaping surface because it is low in organic matter and often compacts hard. For topsoil, lawns, and gardens, order screened topsoil or a mix with organic compost on top of compacted fill dirt. Use fill dirt for grading, raising yard elevations, or under a top layer of quality soil to get proper plant growth.

Fill dirt can be used as subgrade material for driveways and under slabs if properly placed and compacted, but it is not suitable as the surface material. Contractors typically place fill dirt in 4- to 6-inch lifts and compact each lift with mechanical equipment to meet structural specifications. For driveways, add a compacted gravel base and the recommended surface material on top of the compacted fill dirt.

To raise 1,000 sq ft by 3 inches you need about 9.3 cubic yards of fill (27 cu ft/yd3 ÷ (0.25 ft depth) × 1,000 sq ft = 9.3 yd3), which in Wellington will be roughly 11 to 13 tons depending on soil density. Always order 5-10% extra to allow for settling and compaction. Use our calculator with your exact lot size or contact our team for help estimating.

Yes, many West Texas sites around Wellington contain caliche or harder clay layers; these can make the fill denser and harder to grade or compact. Caliche can be acceptable for some structural fills but may require different equipment or removal if you need good drainage or plan to grow plants. Mention any caliche concerns when ordering so we can match you with appropriate local materials and suppliers.

In Wellington’s semi-arid climate, fill dirt should be placed in thin lifts (commonly 4 to 6 inches) and compacted with a plate compactor or roller for reliable results. Dampening the soil slightly before compaction helps achieve better density, but avoid overwatering which can weaken the fill. For structural or engineered fills, follow a civil engineer’s compaction specs and testing requirements.

You can request tailgate spreading at checkout, and drivers may be able to assist at their discretion based on access and safety. Hello Gravel’s network drivers will assess the site on arrival and decide if spreading can be done safely, but this service is not guaranteed. If you need guaranteed spreading, consider hiring local labor or ask your supplier for a spreading crew.

Fill dirt itself is low in organic material and generally does not attract pests the way compost or mulch might. However, if used as a surface layer without topsoil, it can become compacted and create conditions for burrowing pests in some areas. For planting beds or lawn areas, cover compacted fill with quality topsoil to promote healthy plants and reduce pest issues.

The most cost-effective option is to order the right quantity from a local supplier through Hello Gravel to avoid long hauls; our platform sources regional materials to keep delivery costs down. Ordering the minimum required and scheduling standard delivery (2+ business days) often avoids extra fees compared with rush or next-day delivery. Also consolidate orders for multiple projects to reduce per-ton delivery costs.

Do not use fill dirt as the final planting surface, for flower beds, or where good soil fertility and drainage are required. Avoid using untreated fill dirt in areas where expansive clays or caliche could cause settlement or frost heave without proper engineering measures. For any load-bearing or structural application, check with an engineer and specify compaction and material requirements before ordering.