Fill Dirt in Clarendon, TX

Local prices for fill dirt in Clarendon and West Texas vary with haul distance, supplier, and material quality. Typical ballpark ranges are about $8 to $25 per cubic yard or roughly $6 to $20 per ton, but rates change with availability and seasonal demand. For an accurate, up-to-date price for your address, get a quote through Hello Gravel by entering your zip code.

Hello Gravel works with local Clarendon and West Texas suppliers and contracted haulers that can deliver fill dirt; specific company names vary by day. Minimum order size in our network is generally 3 tons, and many areas offer free delivery while others add a delivery fee based on distance and access. If you need spreading or compacting, request it at checkout and ask for local contractor pricing—spreading is done at the driver’s discretion and may carry an extra charge.

Clarendon and much of West Texas commonly have clay and caliche layers that affect drainage and compaction. Fill dirt can be used to raise grade or fill low spots, but clay-heavy native soils and caliche can create drainage or bonding issues unless you prepare the subgrade and compact properly. For driveways or structural areas, combine fill dirt with a well-draining base (crushed limestone or road base) and pay attention to moisture control when compacting.

Compact fill dirt in 4- to 6-inch lifts using a plate compactor for small areas or a vibratory roller for larger areas, and lightly moisten very dry soil to help compaction. Expect some initial settlement over months, especially if the material was placed loose or over organic soils; plan for 10-20% extra volume or 1 to 2 inches of final settlement for small fills, and regrade after the first rainy season. For structural fills or foundations, consider engineered compaction testing through a local contractor.

Permitting rules can vary by project type; minor grading and small yard fills often do not require permits, but changes that affect drainage, septic systems, building pads, or grading near roadways may. For Clarendon and Donley County, check with the City of Clarendon and Donley County offices before large fills or any work that changes stormwater flow, and confirm septic or building permit requirements with your local permitting office. If you need help, Hello Gravel can advise you to check local authorities before delivery.

For simple grade raising or backfill, clean fill dirt with limited organic material is appropriate. For driveways and building pads, a combination of screened fill dirt for grade plus a structural base (crusher run, road base, or crushed limestone) on top provides better drainage and load capacity in West Texas heat and occasional heavy rains. If erosion or drainage is a concern, ask for fill with coarser particles or add geotextile and aggregate layers for stability.

A 10-by-30-foot area (300 square feet) raised 4 inches requires about 100 cubic feet, which equals roughly 3.7 cubic yards of material (100 / 27 = 3.7). Because compaction and loss occur during placement, plan to order 10-20% extra—so about 4 to 4.5 cubic yards, which is roughly 5 to 6 tons depending on moisture and composition. Remember Hello Gravel’s minimum order is 3 tons, so confirm quantities when you get a quote.

Common additional costs include spreading or labor to move material on-site, mechanical compaction, geotextile fabric, delivery surcharges for rough access or long hauls, and any required permits or inspections. Tailgate spreading may be available at checkout but is not guaranteed and could carry an extra fee; compaction and contractor labor are typically billed separately. Ask for an itemized quote from Hello Gravel so you can budget for these services.

In Clarendon’s semi-arid climate, loose fill dirt can produce dust in dry months and is vulnerable to erosion or washouts during heavy storms if not compacted and properly drained. Well-compacted fill with finished slopes, vegetation, or surface aggregate will reduce dust and erosion and extend the time between maintenance. For driveways or frequently trafficked areas, a structural aggregate surface will greatly reduce long-term maintenance versus raw fill dirt.

Fill dirt is the most cost-effective option for raising grade or filling low spots, but it is not an engineered structural layer. Crushed limestone, crusher run, or engineered base materials are better choices for septic pads, driveways, and building pads because they provide drainage, compaction targets, and load-bearing capacity. For critical or load-bearing applications in Clarendon, invest in an engineered base over compacted fill and consult a contractor or engineer for specific recommendations.

Slope ground away from foundations with at least a 5% grade (about 6 inches of fall over the first 10 feet) to prevent water pooling near buildings, and use swales, French drains, or downspout extensions to direct runoff away. Protect loose fill with erosion-control measures such as temporary straw cover, hydroseed, riprap in concentrated flow areas, and geotextile fabric under slopes or aggregate. If you are altering drainage patterns, check local permitting and consider a professional grading plan for larger projects.