Fill Dirt in Gregg County, TX

Fill-dirt is generally native soil or borrow material used to raise grade, fill holes, or build up pads. In Gregg County it often contains clay and silt typical of East Texas, so it is best used where drainage and compaction are controlled rather than as a final surface for driveways or patios.

A good rule of thumb in Gregg County is about 1.2 to 1.4 tons per cubic yard depending on moisture and soil type (clay runs heavier). For example, a 10 ft x 10 ft area filled 1 ft deep equals 10 cubic yards or roughly 12 to 14 tons; always add 10-15% extra to account for compaction and settlement.

For wet, clay-prone sites in Gregg County, choose well-draining, free-draining granular fill (clean sand or gravel) where possible; if only fill-dirt is available, ask for a 'select' or processed fill with less organic matter and better grading. Also plan for a granular cap (4-6 inches of crushed stone) and positive drainage to keep water away from the compacted fill.

Place fill in uniform lifts (6 to 8 inches loose) and compact each lift to 90% or higher of the Standard Proctor specification using a vibratory roller for large areas or a plate compactor for small spots. Control moisture during compaction (East Texas clay can be sticky when wet), stagger loads, and finish with a granular base and grade to encourage surface drainage.

Prices vary by supplier, haul distance, and season, but delivered fill-dirt in Gregg County typically ranges roughly $12 to $30 per ton (approximately $16 to $40 per cubic yard). Tailgate spreading or machine spreading is often an extra charge; expect spreading labor or machine time quoted per hour or per cubic yard—get a detailed written quote from Hello Gravel for your zip code and project size.

Yes—Hello Gravel can connect you with local suppliers and dump truck haulers serving Gregg County; deliveries are usually made by tri-axle trucks. Before delivery clear an access route, mark the desired drop zone, note overhead wires and soft lawn areas, and add Order Notes if you want the driver to consider tailgate spreading (subject to driver discretion and site safety).

Large hauls may be subject to county or local road restrictions, bridge weight limits, and hauling hours—contact the Gregg County Road and Bridge office or TxDOT for route and permit questions. Also check local building and drainage permits for large fills near creeks or within floodplains, and consult an engineer for fills that affect foundations or lot drainage.

Provide a soil report or compaction spec to the supplier, use select structural fill where required, compact in specified lifts with documented testing (nuclear gauge or Proctor-based acceptance), and show planned drainage details to the permitting authority. Working with Hello Gravel to schedule delivery windows and noting access or staging areas in advance also cuts delays and helps crews plan equipment on arrival.