Fill Dirt in Everman, TX

Fill dirt is subsoil used to raise grades or fill low spots; it typically contains little organic material and may include clay, sand, and rock. In Everman, local fill dirt often reflects West Texas geology and can be heavier and more clayey than topsoil, so it is best used for bulk raising and subgrade work rather than planting or final surfaces.

Prices vary with distance, supplier, and whether the dirt is clean or contains debris, but typical delivered ranges in the West Texas/Fort Worth area are approximately $8 to $20 per ton (about $6 to $15 per cubic yard). For an exact price and to factor in delivery minimums and next-day fees, check pricing for your zip code at checkout or contact our team.

For yard raising, compactable subsoil (low organics) is usually fine if placed in 4-6 inch lifts and compacted. For foundation backfill and driveway bases in clay-prone Everman soils, use a well-graded, compactable fill or a granular engineered fill; for driveways, top the fill with crusher run or an aggregate base to improve drainage and traffic performance.

To raise 1,000 sq ft by 6 inches you need about 18.5 cubic yards (1,000 sq ft x 0.5 ft = 500 cubic feet; 500/27 = 18.5 yd3). That is roughly 22 to 26 tons of typical fill dirt depending on moisture and composition (use 1.2 to 1.4 tons per cubic yard as a working estimate).

A 20x20 ft area raised 6 inches needs about 7.4 cubic yards (400 sq ft x 0.5 ft = 200 cu ft; 200/27 = 7.41 yd3), or roughly 9 to 10.5 tons. A 12x40 ft area raised 6 inches needs about 8.9 cubic yards (480 sq ft x 0.5 ft = 240 cu ft; 240/27 = 8.89 yd3), or roughly 10.7 to 12.5 tons, depending on material density.

Plain fill dirt is not ideal for drainage: it compacts and can hold water, and clay-rich local fills can lead to poor drainage and runoff during heavy rains. For erosion control and better drainage in West Texas, combine fill dirt with granular layers, use proper grading, install swales or French drains, and consider geotextile or riprap on slopes.

Hello Gravel's minimum order is 3 tons. Delivery is usually by dump truck (commonly tri-axle), which typically carries roughly 10-14 cubic yards (about 12-20 tons depending on material). Extra fees may apply for next-day delivery, long-haul distances, tight access, stairs, or tailgate spreading requests; exact fees are shown at checkout or by quote.

Local contractor rates vary, but homeowners in the Everman/Fort Worth area can expect spreading and compaction labor in the range of about $0.50 to $1.50 per square foot or roughly $10 to $25 per ton as a ballpark. Always get multiple quotes and confirm whether the price includes compaction in lifts, mobilization, and cleanup.

If the driveway will carry vehicles or if the site is on expansive clay or a slope, stabilize the base by using a layer of crusher run or engineered aggregate under the surface. Standard practice is 4-6 inches of compacted aggregate base, then a 2-3 inch wearing layer; use fill dirt only to raise subgrade and not as the finished driving surface.

For homeowners, a plate compactor rental typically runs $75 to $150 per day, a small vibratory roller $200 to $600 per day, and a skid steer or mini-excavator $200 to $500 per day. Compact in 4-6 inch lifts, keep moisture content moderate for best compaction, and consider hiring a pro for larger areas or structural work.

Common issues are settling, washout during heavy storms, dust in dry weather, and poor drainage from clay-rich fills. Prevent problems by placing and compacting in lifts, installing proper grading and drainage, adding a granular surface layer for driveways, and applying erosion controls or vegetation quickly on exposed areas.

Fill dirt is the most cost-effective option for bulk raising and subgrade work, but it lacks the drainage and load-bearing characteristics of crushed limestone or engineered base, which are better for driveways and building pads. Topsoil is for planting and should not be used as a structural fill; for longevity in Everman conditions, use engineered base for driving surfaces and reserve fill dirt for bulk fill and grade work.