Fill Dirt in Cochran's Crossing, TX

Local fill-dirt pricing in the Cochran's Crossing/The Woodlands area typically falls in a broad range because costs depend on supplier distance, material quality, and volume. Expect ballpark prices around $8 to $25 per ton (roughly $10 to $40 per cubic yard) with Hello Gravel minimums starting at 3 tons; exact pricing is available after you enter your zip code. Standard delivery is 2+ business days, next-day delivery is available for orders placed before noon CST for an extra fee, and tailgate spreading is offered at the driver’s discretion.

Hello Gravel connects you with local quarries and haulers that serve The Woodlands/Cochran's Crossing area, so availability depends on your exact zip code and schedule. Many local suppliers deliver bulk fill-dirt, but spreading is not guaranteed: drivers may offer tailgate spreading at their discretion and safety permitting. If spreading is important, note it in Order Notes, contact customer service, and confirm with the assigned supplier before delivery.

Calculate area x depth to get cubic feet: 20 ft x 30 ft x 0.5 ft = 300 cubic feet, then divide by 27 to get 11.11 cubic yards. Use a conversion of about 1.3 tons per cubic yard for typical fill-dirt, so 11.11 yd^3 x 1.3 = about 14.4 tons. Contractors usually add 5-10% extra for compaction and settling, so plan to order roughly 15 to 16 tons and round up to meet the 3-ton minimum.

Much of the Cochran's Crossing area sits on Houston Belt Prairie clays that drain slowly and can hold water after heavy rain. Fill-dirt can help by raising grade and creating positive drainage away from structures, but performance depends on how the material is placed and compacted and whether proper surface drainage is installed. For driveways and under slabs use engineered granular fills rather than loose fine fill, and for saturated or poorly drained sites consider a geotechnical review or professional contractor for long-term performance.

Possibly. Cochran's Crossing is part of The Woodlands master-planned community and many projects that change yard grade, create visible stockpiles, or alter drainage may require HOA/covenant approval and could trigger county permits (check Montgomery County or the local municipal authority for your lot). Always check with your neighborhood HOA or property management and the local permit office before ordering large deliveries or doing major regrades.

For residential driveways in The Woodlands area contractors commonly place 4 to 6 inches of compacted crushed stone or road base over geotextile, compacting in 2- to 3-inch lifts with a plate compactor or roller. Garage slabs and structural pads typically require 4 to 8 inches of engineered fill or compacted base and may specify compaction testing to meet local code or engineering requirements. For yard regrades contractors often place fill in 6- to 12-inch lifts, compacting each lift and allowing for settlement; discuss target compaction levels and testing needs with your contractor if the project affects structures or drainage.

Order clean fill-dirt or topsoil mix for general landscaping and planting beds to ensure good plant performance; avoid heavy clay topsoil for beds where drainage matters. For utility trenches, follow the utility or plumber specs—many require free-draining backfill or sand. For concrete work (driveways, slabs, garage floors) use a granular base product such as crusher run or road base rather than loose fill-dirt; tell your supplier the intended use so they can recommend the right material.