Fill Dirt in Buffalo, TX

Delivered fill dirt prices vary with source, distance, and quality. In West Texas you can typically expect about $10 to $35 per cubic yard or roughly $8 to $25 per ton delivered, depending on haul distance and site access; local variations apply. Hello Gravel has a 3-ton minimum and may offer free delivery in many zip codes, so check your zip or get a local quote for an exact price.

Hello Gravel connects you to local suppliers that service Buffalo and surrounding West Texas areas; exact suppliers vary by zip code. Typical delivery rules include a 3-ton minimum, trucks operating within a 20-50 mile radius of the yard, tri-axle dump trucks on site, and tailgate spreading offered at the driver’s discretion. For specific supplier names, radiuses, and minimums, check availability for your zip code or request a quote.

Most local deliveries to Buffalo use tri-axle dump trucks holding about 10 to 14 cubic yards of loose fill dirt. Depending on moisture and compaction that is roughly 12 to 18 tons per truck. If you need more or have tight access, ask for smaller loads or voicedrop options when ordering.

For non-structural yard fill, place fill dirt in lifts of about 6 inches and compact each lift with a plate compactor or tamper. For driveways or structural pads, use 6 to 8 inch lifts with mechanical compaction and aim for roughly 90-95% Standard Proctor density; engineered fill and compaction testing are recommended for foundations. When in doubt, consult a geotechnical engineer for target compaction and testing requirements.

Yes, West Texas soils around Buffalo commonly include clays, caliche pockets, or expansive layers that can affect settlement and drainage. These soil conditions can cause uneven settling or poor drainage if fill is not placed and compacted properly, so pre-site evaluation and drainage planning are advised. For structural or critical projects, consider a soil test and possibly engineered fill to reduce risk.

Local city and county rules apply and can affect raising yard grades, building pads, or work near floodplains and drainageways. Before bringing in large volumes, check Buffalo city hall and your county permitting office for grade, floodplain, septic, or driveway permit requirements. If you are filling near a septic system, well, or floodplain, get approval from the appropriate local authority first.

Hot, dry summers in West Texas can cause initial shrinkage and minor cracking, while seasonal storms can cause erosion or washouts if fill is not stabilized. Proper compaction, erosion control (silt fence or straw), and grading for positive drainage will minimize maintenance; vegetation or topsoil as a finishing layer also helps. Expect most settlement to occur during the first rainy season, so plan for a small top-up if needed.

Fill dirt is the most economical option for raising grade or backfill where structural strength and drainage are not critical, but it does not provide a stable wearing surface. Crushed limestone or road base is preferred for driveways because it compacts into a firm, draining surface, and engineered fill is recommended where structural support, controlled compaction, or testing is required. Choose material based on function: cheap bulk fill for grading, road base for driveways, and engineered material for foundations or critical pads.

Typical lead time through Hello Gravel is 2+ business days for standard delivery, with next-day delivery available for orders placed before noon CST (additional fee may apply). Regional availability can tighten after major storms, during drought-driven grading projects, or at high landscaping season, so ordering early is advised. We recommend booking deliveries well before project start dates to avoid scheduling delays.

Use volume = area x depth: 500 sq ft at 6 in (0.5 ft) is about 9.3 cubic yards, and 1,000 sq ft at 6 in is about 18.5 cubic yards. Using a typical conversion of 1.2 to 1.4 tons per cubic yard for fill dirt, plan on roughly 11 to 13 tons for 500 sq ft at 6 in and about 22 to 26 tons for 1,000 sq ft at 6 in. Add 5-10% extra to account for compaction and settlement and use our material calculator or request a quote for exact amounts.