Fill Dirt in Grand Prairie, TX

Delivered fill dirt prices in Grand Prairie typically run in a range rather than a single price. Expect roughly $12 to $28 per cubic yard (about $8 to $20 per ton), with actual cost depending on moisture content, clay content, delivery distance, and truck size. Hello Gravel has a 3-ton minimum, many areas get free standard delivery, and next-day delivery is available for an extra fee when ordered before noon CST. For an exact price, check your zip code on Hello Gravel and get a quote.

Hello Gravel connects you with trusted local suppliers and haulers serving Grand Prairie rather than selling directly under one brand. Minimums vary by supplier and truck type: Hello Gravel’s minimum is 3 tons, many local suppliers require a loader/truck minimum (often a tri-axle) that can equal 7 to 10 tons for some routes. For smaller garden-sized needs, ask about split loads, yardage buckets, or local landscapers who may sell smaller amounts.

Measure the area to be filled (length x width) and the average depth in feet, then divide by 27 to get cubic yards (length x width x depth ÷ 27 = cubic yards). Convert cubic yards to tons by multiplying by a material-specific factor; for fill dirt in Grand Prairie’s clay soils use about 1.1 to 1.35 tons per cubic yard depending on moisture and clay content. Add 10–15% extra to account for settlement and compaction, and round up to the Hello Gravel minimum (3 tons) when ordering.

Fill dirt is best for raising grade or filling low spots and is not a suitable final driving surface because it is rich in fines and can rut and hold water. For driveways in Grand Prairie’s climate you should use a compacted crushed limestone or class 5 road base as the structural layer, and reserve fill dirt only to adjust subgrade elevations before placing the base. If you plan to use fill dirt under a driveway, compact it to proper specifications and then cover it with a 4–8 inch engineered base material for long-term performance.

For structural work (house pads, building foundations) many contractors require compaction to about 95% of standard Proctor; for landscaping and non-structural fills 85–90% is commonly acceptable. Use a vibratory plate compactor or walk-behind plate for thin lifts (up to 4–6 inches), and a sheepsfoot or vibratory roller for thicker lifts and heavy clay; place fill in uniform lifts and control moisture to reach target density. Work with your contractor or local building department to confirm compaction specs required for your permit or project.

Permitting and grading requirements can apply, especially for structural fills, large grading changes, or anything affecting drainage and erosion. Grand Prairie typically requires permits for sizable grading or site development and may require engineered fill or compaction certifications for building pads; small landscaping fills often do not need a permit but you should confirm with Grand Prairie Building Inspections before delivery. Always check local codes and document any permit or inspection needs before ordering material to avoid rework or holds.

Grand Prairie’s hot, humid summers and intermittent freezes can make clay-rich fill dirt prone to shrink-swell and temporary softening when wet. Proper compaction, good drainage, and using well-graded or amended fill reduce movement—avoid using untreated fill dirt where persistent wetness or freeze-thaw cycles affect performance. For areas exposed to weather, cap fill dirt with a drainage layer or engineered base and consider vegetation or erosion control to stabilize slopes.

Expect fees or restrictions for small loads, tight access, driveway protection, or rehandling the material from the truck to the final spot. Hello Gravel typically requires a minimum of 3 tons, schedules standard delivery in 2+ business days (next-day available with a fee before noon CST), and allows requests for driveway protection or tailgate spreading at checkout, but drivers perform spreading at their discretion. Make sure to mark the drop zone, clear obstacles, and ask for a quote that lists any small-load, driveway-protection, or offload fees before confirming the order.

Clear the delivery path and proposed drop location of vehicles, low branches, and obstacles, and mark underground utilities by calling 811 at least two business days before delivery. Measure and stake the drop zone so drivers can place material without extra handling, and notify Hello Gravel in Order Notes about access constraints or requests for driveway protection. Have compaction equipment or a contractor ready if you need material compacted in lifts soon after delivery to reduce settlement and track-out.

Fill dirt quality varies by local source and is influenced by local geology; in the Grand Prairie area expect material to reflect regional clay and subsoil characteristics. If you need clean, low-organic fill, or a specific color or texture, note that in your order and ask Hello Gravel about supplier options—topsoil and engineered fills are different products and should be ordered separately. Remember that natural materials vary, so photos are illustrative and exact matches are not guaranteed.