Fill Dirt in Como, TX

Rates vary by supplier distance and load size, but Hello Gravel requires a 3-ton minimum and shows delivery fees up front when you get a quote. Rural West Texas deliveries can add a modest haul fee if the nearest supplier is farther away, so check your zip code on checkout or request a quote for an exact price.

Fill dirt typically weighs about 1.1 to 1.4 tons per cubic yard when compacted; a common planning number is 1.25 tons per cubic yard. For ordering, calculate cubic yards by area times depth, then multiply by 1.25 for a ton estimate and add 10-20% extra for compaction and settlement.

Use low-organic, screened fill dirt for foundation backfill and any area that needs good compaction; avoid topsoil or high-organic mixes. For driveways, use fill dirt as subgrade only and place a layer of crusher-run or road base on top for a stable driving surface.

Fill dirt can compact well, but West Texas clay and seasonal dryness cause shrink-swell behavior that affects long-term stability. Proper compaction in thin lifts (typically 4 to 6 inches), moisture control during compaction, and using a well-graded fill or engineered backfill will give the best results for structural work.

Many local suppliers in West Texas offer both screened (finer, fewer roots and debris) and unscreened fill dirt; screened material is preferred for compaction and tends to cost a bit more. Hello Gravel shows the product type and price in the listing so you can compare screened versus unscreened options for your delivery.

Small projects like minor yard leveling often do not require a permit, but any work that changes drainage, affects public right-of-way, or involves significant grading may need county permits or approvals. Check with Hopkins County and your local HOA before large deliveries or regrading, since rules can vary and some HOAs restrict visible alterations.

Fill dirt is generally less expensive per ton than crusher-run or road base, but it is not a durable driving surface by itself. For a driveway, plan to use fill dirt to raise or level the subgrade and then cover with crusher-run or road base, which costs more but provides the necessary strength and drainage.

Fill dirt used alone on a driveway will rut, wash out, and settle quickly in West Texas weather and typically requires frequent maintenance. Expect to regrade, add material, and address drainage regularly unless you place a proper driving surface such as road base or gravel over the fill dirt.

Hello Gravel has a 3-ton minimum order; deliveries are made by contracted dump trucks, typically tri-axles. If you need spreading or loading equipment like a small loader, confirm with the supplier ahead of time; drivers may offer tailgate spreading at their discretion but there are no guarantees.

Measure your driveway (example: a one-car driveway 10 ft wide by 20 ft long = 200 sq ft). At 6 inches (0.5 ft), that is 100 cubic feet or about 3.7 cubic yards; using 1.25 tons per cubic yard equals roughly 4.6 tons, and adding 15% for compaction/settling brings the total to about 5.3 tons. Adjust based on your actual dimensions and round up to cover waste and minor grade errors.

Clear vegetation and organic topsoil from the area, verify drainage paths so water does not pool, and request screened, low-organic fill dirt for better compaction. Schedule deliveries during dry weather when possible, compact in 4- to 6-inch lifts, and plan to top the area with road base or gravel for driveways and high-traffic zones.