Fill Dirt in Jim Wells County, TX

Fill-dirt is subsoil with low organic content used to raise grades, fill holes, or build pads; it is not topsoil and is not intended for plant growth. In Jim Wells County you would use fill-dirt to level a lot, build driveways or house pads, or to correct drainage low spots before surfacing or planting.

Prices vary by supplier, haul distance, screening, and quantity, but as a ballpark expect roughly $10 to $30 per ton (about $8 to $22 per cubic yard) delivered in the South Texas region. For an exact price for your address and the material spec you need, request a quote through Hello Gravel (minimum order 3 tons).

Many suppliers in and around Jim Wells County stock screened, compactable fill-dirt suitable for residential and light commercial work, and most work with local haulers. Hello Gravel connects you with those local suppliers and contracted dump truck fleets; hauling is standard, and tailgate spreading is sometimes available at the driver’s discretion—request it at checkout but expect assessment on site.

Jim Wells County soils commonly include clay and sandy clay with some sandier pockets, which can be prone to seasonal shrink-swell and poor drainage if left uncompacted. Choose clean, compactable fill-dirt with low organic matter and plan for proper compaction and drainage to reduce settlement and movement over time.

Place fill-dirt in thin lifts—typically 4 to 6 inches loose—and compact each lift to a specified density (commonly 90% to 95% of Standard Proctor where required). Moisture conditioning, a compaction plate or roller, and proof-rolling after placement are standard practices; for structural pads, follow an engineer’s specs and consider lab testing and compaction reports.

Permit and compaction requirements vary by project and jurisdiction; many residential building pads, foundations, and driveways are subject to local building or county rules and may require engineered fill, compaction testing, or a permit. Check with the Jim Wells County building department and any city jurisdiction (for example City of Alice) before you begin, and consult a local engineer if your project involves structural loads.

Performance depends on the material and installation: compacted, well-draining fill-dirt with proper slopes and drainage will perform well in heavy rain, while clay-rich fills that are not properly compacted can pond, settle, or heave with wet-dry cycles. Design drainage away from structures, add subdrains or gravel where needed, and follow compaction and lift recommendations to minimize problems from seasonal moisture changes.

Specify that you need 'fill-dirt' and note if you want screened or compactable material, the delivery location and preferred drop area, and any access constraints in Order Notes. Remember our minimum order is 3 tons, choose your delivery date at checkout (standard 2+ business days or next-day if ordered before noon CST with a fee), and request tailgate spreading if desired—drivers will assess safety and feasibility on arrival.