Fill Dirt in San Angelo, TX

Prices vary by supplier and local availability, but in San Angelo you can typically expect fill dirt to run about $8 to $25 per ton (roughly $10 to $30 per cubic yard loose). Final cost depends on moisture content, presence of caliche, delivery distance, and truckloads; taxes and delivery fees may apply. Use Hello Gravel’s zip-code lookup for accurate local quotes and remember our minimum order is 3 tons.

Hello Gravel connects you with trusted local San Angelo suppliers and contracted dump truck fleets that deliver regionally sourced fill dirt. Common delivery minimums are 3 tons (Hello Gravel minimum), with typical delivery via tri-axle trucks; free delivery is available in many areas but fees can apply for long hauls or next-day service. You can request a delivery date at checkout and ask for tailgate spreading, which drivers may provide at their discretion.

Estimate cubic yards first: area (sq ft) × depth (ft) ÷ 27, then convert to tons (rough rule: 1 cubic yard of fill dirt ≈ 1.1–1.3 tons depending on moisture). Examples: leveling 500 sq ft at 3 inches needs about 4.6 cubic yards (≈5–6 tons); a 10'×20' patio base at 4 inches needs about 3 cubic yards (≈3.5 tons); a 12'×50' driveway with 6u0022 of fill requires about 11 cubic yards (≈12–14 tons). Always round up for compaction and waste and contact our team for a site-specific estimate.

Fill dirt is suitable for raising grades and filling low spots in San Angelo, but it is not ideal as a finished surface because local hot, dry summers can cause shrinkage and cracking while occasional heavy rains can cause erosion. San Angelo soils often contain clay and caliche, which affect drainage and compaction; caliche can add stability but reduce permeability. For long-term surfaces, cap fill dirt with engineered base materials and proper drainage.

Uncompacted fill dirt can settle several inches over the first months, especially under heavy irrigation or after rain. Contractors typically place fill in 4 to 6-inch lifts and mechanically compact each lift with a plate compactor or roller to minimize settlement; moisture conditioning helps achieve consistent compaction. For load-bearing areas, discuss compaction targets with your contractor—proper compaction reduces long-term maintenance.

Fill dirt can be used to build grade, but it is not recommended as the structural base for driveways or parking pads in San Angelo. Crushed limestone or road base provides better drainage, load-bearing capacity, and resistance to rutting in West Texas conditions. If you use fill dirt to raise the subgrade, cap it with a minimum of 4–6 inches of road base or crushed stone for a durable surface.

Rules vary: San Angelo may require permits for significant grading, changing drainage patterns, or filling large amounts of material, and many HOAs have restrictions on visible landscaping and driveway materials. Before ordering fill dirt, check with the City of San Angelo Planning or Building Department for grading or stormwater requirements and review your HOA covenants for material or appearance rules. If unsure, Hello Gravel can help you prepare order details to show local officials or your HOA.

If fill dirt is left exposed or used as a base without a proper cap, expect more frequent maintenance: settling, potholes, and washouts after heavy rains that may require regrading or adding material annually or every few years. Properly capped fill dirt with road base and good drainage will reduce maintenance and can last many years with occasional top-ups of aggregate. Inspect after heavy storms and address low spots promptly to prevent bigger repair jobs.

Yes, local fill dirt in the San Angelo area often contains caliche (a calcium carbonate layer or nodules) because of regional geology. Caliche can improve bearing capacity and reduce shrink-swell in some cases, but it can also make the material harder to grade, reduce permeability, and complicate compaction equipment choice. Tell suppliers if you need a low-caliche or washed material, and we can try to match local sources to your project needs.

Prepare a clear drop location free of low branches, vehicles, and obstacles and mark utilities or sensitive areas before delivery; provide gate codes or access instructions at checkout. Choose your delivery date in the Hello Gravel checkout, request tailgate spreading if desired (driver discretion), and plan for a tri-axle truck offload—truck placement and distance from drop zone can affect exact placement and any additional fees. If you need help calculating quantities or specifying placement, contact our team at 855-241-8884 or text 844-407-3734.