Fill Dirt in Pecan Grove, TX

Fill-dirt is subsoil removed from excavations or pits that contains few roots or organic materials; in the Texas Region around Pecan Grove it commonly has clay and silt with a reddish-brown or tan color. It is used to raise grades and fill low spots rather than as a finished surface. Because Hello Gravel sources locally, texture and color may vary by supplier.

Typical delivered prices for fill-dirt in the Texas Region range from about $10 to $30 per ton, depending on local supply, haul distance, and whether the load contains screened or compactable material. Jobs with contamination (debris or organics) or long haul distances can push costs higher. Hello Gravel lists a 3-ton minimum and often includes free standard delivery depending on your zip code and supplier.

Hello Gravel requires a minimum order of 3 tons on our platform, while a single tri-axle dump truck typically carries about 10 to 12 tons of fill-dirt. Standard delivery within our network is 2+ business days with no extra fee in many areas, but fees can apply for long hauls, tight access, offloading in multiple spots, or next-day delivery. Request tailgate spreading at checkout if desired, but drivers perform spreading only at their discretion.

Pecan Grove's hot summers and heavy summer rains can increase settlement and shrink-swell behavior in clay-rich fill-dirt: the material may compact unevenly when wet and then settle more as it dries. Proper placement in controlled lifts and compaction reduces post-delivery settlement and erosion during heavy storms. For areas that see ponding or frequent saturation, consider using engineered structural fill or adding a drainage layer to improve long-term stability.

Homeowners use fill-dirt to raise low yards, build gentle slopes for drainage, create level pads for sheds and pools, backfill utility trenches, and rough-grade driveways or berms. It is ideal for bulk grade adjustments but not intended as a finished driving surface. For driveways or final surfaces, combine fill-dirt with a base material like crushed stone or class II road base.

Multiply the area in square feet by the desired depth in inches, divide by 12 to get cubic feet, then divide by 27 to convert to cubic yards. Multiply cubic yards by about 1.3 tons per cubic yard for typical fill-dirt in this region. Example: 1,000 sq ft at 6 inches = (1,000*6/12)/27 = 18.5 cu yd, roughly 24 tons (18.5 * 1.3).

Rules vary by lot and subdivision; many Pecan Grove properties are in Fort Bend County and also part of an HOA. Check Fort Bend County building and grading rules and your HOA covenants before moving significant amounts of fill or changing drainage patterns. Also confirm whether your property is in a regulated drainage easement or FEMA floodplain, since both can require permits or engineered plans.

Fill-dirt is inexpensive bulk subsoil for raising grades and filling voids, but it does not provide the drainage, shear strength, or compaction characteristics of crushed limestone or class II road base. Crushed limestone and class II compact well and make better bases for driveways and pads; structural fill (engineered, tested material) is recommended for building pads and foundations. For most Pecan Grove driveways, use fill-dirt only for grade work and cap it with an appropriate base material for lasting performance.

Proper installation usually means placing fill-dirt in 4 to 6 inch lifts and compacting each lift with a plate compactor for small areas or a vibratory roller for larger jobs; moisture control while compacting is important. Small DIY jobs can be done with a rented skid steer and plate compactor; expect equipment rental day rates roughly $60 to $400 depending on the tool, while contractor rates for spreading and compaction vary by project size and typically run significantly higher. For accurate pricing and to meet local compaction or grading requirements, get written quotes from local contractors or ask our team to connect you with local suppliers and haulers.