Fill Dirt in Lott, TX

Material prices for fill dirt in West Texas commonly range from about $6 to $18 per cubic yard depending on quality and local availability. Delivery and hauling can add $100 to $400 or more for local jobs depending on distance and truck size; Hello Gravel has a 3-ton minimum and standard delivery is 2+ business days with next-day available before noon CST for an extra fee.

For structural work like driveways and building pads, use compactable, low-organic fill dirt with a mix of fines and coarse particles so it compacts well. For landscaping or grading where plants are needed, use fill dirt capped with topsoil or a topsoil blend, because pure fill dirt is not good for plant growth.

West Texas heat and drought can make loose fill dirt dusty and prone to wind erosion, while occasional heavy rain can cause erosion and uneven settling if not compacted and drained properly. Good compaction, temporary stabilization (watering and rolling or tackifiers), and proper drainage planning reduce dust and erosion risks.

One cubic yard is 27 cubic feet and weighs roughly 1.1 to 1.35 tons for typical fill dirt. Example: to raise 1,000 sq ft by 1 inch you need about 3.1 cubic yards (about 3.5 tons); to raise a 200 sq ft patio by 6 inches you need about 3.7 cubic yards (about 4 to 5 tons).

Yes—Hello Gravel sources from a regional network of suppliers and contracted haulers serving Falls County and nearby West Texas hubs. We can coordinate delivery; tailgate spreading is available at the driver's discretion and may be requested at checkout but is not guaranteed.

Local rules vary; small landscaping fills typically do not need permits, but larger grading, retaining wall bases, or changes to drainage patterns may require Falls County or City of Lott permits or approvals. Check with the City of Lott and Falls County permitting or planning office before major fill work to avoid drainage or floodplain issues.

Properly compacted fill dirt used as subgrade can last many years, but surface performance depends on base material and surfacing (gravel, asphalt, concrete). Expect to inspect after heavy rains and regrade or add surface material every few years; regular drainage maintenance and occasional re-compaction or top dressing prolong life.

Fill dirt is economical for structural fill and raising grade because it compacts well and is low in organic matter, but it is not suitable for planting. Crushed rock provides better load-bearing and drainage for driveways and road surfaces, sand drains faster but compacts less predictably, and topsoil is needed only where plants will grow.

For small jobs contractors use plate compactors or jumping jacks; for larger fills they use vibratory rollers or sheepsfoot rollers and place fill in 6- to 8-inch lifts. Proper moisture control while compacting and testing (nuclear or Proctor checks) are standard practice for structural work.

Buyers often worry about dust, erosion, settling, and material quality. Suppliers and haulers address these by recommending compaction, adding cover or seed for erosion control, applying water or tackifiers to reduce dust during placement, and ordering an overage (commonly 5-15%) to allow for future settling.

Clear the delivery area of obstacles and mark the desired drop zone to help the driver place material safely and accurately. For larger fills, provide access for heavy trucks and let our team know about overhead wires, gate widths, and slope or drainage concerns; request tailgate spreading at checkout if you want the driver to consider spreading on arrival.