Fill Dirt in Lowry Crossing, TX

Yes, fill-dirt is generally cheaper than decorative gravel in Lowry Crossing because it is mined and used primarily as a base material rather than a finished surface. Local prices vary with supply and truck distance, but expect fill-dirt to cost noticeably less per cubic yard than crushed rock or decorative stone. Regional factors like trucking from nearby pits and the presence of clay soils in North Texas influence price.

If you ask the driver to tailgate spread, it may be done at their discretion and often at no extra fee, but this is not guaranteed. Hiring a contractor for spreading and grading in the Lowry Crossing area typically runs about $30 to $75 per hour or roughly $5 to $15 per cubic yard depending on access, slope and the finish quality you need.

Truck sizes vary, but a common tri-axle dump truck holds about 10 to 14 cubic yards of loose fill-dirt. Based on local market ranges, a delivered truckload of fill-dirt in the Texas Region often falls between about $200 and $600, depending on yards per truck, material quality, and delivery distance; check Hello Gravel checkout for exact local pricing and our 3-ton minimum order.

'Poor man's concrete' usually means compacted fill or crushed stone used as a cheap, firm base instead of poured concrete. It can work for non-structural uses like temporary pads or simple walkways, but it is not a substitute for engineered concrete for foundations, driveways or areas that need structural strength or drainage control. In Lowry Crossing's clay-prone soils, use caution and consult a contractor if load-bearing performance is required.

Volume-wise, 1 cubic yard equals 27 cubic feet and may physically fit in many full-size pickup beds, but weight is the limiting factor. Fill-dirt typically weighs roughly 2,000 to 3,000 pounds per cubic yard (about 1.0 to 1.5 tons) depending on moisture and composition, which can exceed most pickup payload limits. Check your truck's payload rating and local load laws before hauling fill-dirt yourself.

For erosion control and quick coverage, seed and straw, erosion-control mulch, or a thin layer of topsoil with fast-germinating grass (Bermuda in warm months) are the most economical options. For driveways or high-traffic areas, a light layer of crushed rock or decomposed granite gives a durable surface at modest cost. In North Texas, include erosion-control measures for heavy summer storms and consider temporary silt fences or straw waddles on slopes.

One cubic yard equals 27 cubic feet. That will cover about 324 square feet at 1 inch depth, 162 square feet at 2 inches, or roughly 108 square feet at 3 inches. Use those figures to estimate quantities when leveling low spots or adding a thin lift of material.

Measure the area you want to raise and the average depth in inches, then multiply area (sq ft) by depth (inches) and divide by 324 to get cubic yards (cubic yards = sq ft x depth in inches / 324). Always add 10% to 20% extra for compaction and settling, especially in clayey Lowry Crossing soils. If you prefer, use Hello Gravel's material calculator or contact our team for help with measurements.

Hello Gravel can deliver fill-dirt to Lowry Crossing via our network of local suppliers and contracted dump truck fleets; check service availability by entering your zip code. Tailgate spreading can be requested at checkout and may be performed by the driver at their discretion, but we do not guarantee spreading services; next-day delivery is available for orders placed before noon CST for an additional fee.

Yes. Lowry Crossing and the surrounding North Texas region often have clay and expansive soils that affect drainage and settlement, so choose fill-dirt and compaction methods with those conditions in mind. For building pads, near foundations or in drainage paths, consult a local contractor or engineer to specify proper fill materials, compaction, and grading to avoid future settling or drainage issues.