Fill Dirt in Navasota, TX

Delivered fill dirt in Navasota typically ranges from about $10 to $30 per ton, depending on supplier, haul distance, truck size, and the material quality. Prices can shift with availability and season, so get a live quote through Hello Gravel to see exact delivered pricing for your zip code.

Hello Gravel's minimum order is 3 tons, but most local fill dirt deliveries come by tri-axle dump truck carrying roughly 10 to 15 tons (about 8 to 12 cubic yards). Suppliers commonly deliver within a 20 to 50 mile radius of Navasota; longer hauls may add a distance fee.

For building pads, follow an engineer's recommendations, but typical residential specs call for compaction to about 90 to 95% Standard Proctor with 6 to 8 inch lift thicknesses. Small areas can be compacted with a plate compactor, while larger pads need a vibratory roller or sheepsfoot roller and moisture conditioning to reach target density.

Navasota's clay-prone soils can hold water, swell, then shrink as summer heat dries them, which increases the risk of uneven settling and surface cracking. That makes moisture control, proper grading away from structures, and good subgrade preparation important to reduce long-term movement and drainage problems.

You should check with the City of Navasota and Grimes County before bringing in large volumes of fill, especially if your property is in or near a mapped floodplain or drainageway. FEMA flood maps and local permitting rules can require permits or restrictions; contact the local building or floodplain office for guidance on your specific site.

Common alternatives include crusher-run or road base (good for driveways because they compact and shed water), engineered structural fill or select fill (designed for building pads), and topsoil for planting. Crusher-run and road base cost more than basic fill dirt but perform better for driving surfaces; structural fill costs the most but is the right choice where engineered support is required.

Use this method: cubic yards = area in sq ft × depth in inches ÷ 324, then multiply cubic yards by about 1.3 tons per cubic yard for typical Navasota fill dirt (density can range 1.2–1.5 t/yd3). Example: to raise 1,000 sq ft by 6 inches, you need roughly 18.5 cubic yards, which is about 24 to 25 tons of fill dirt.

Properly compacted and properly drained buried fill can be permanent, but exposed fill used as a driveway surface will wear, settle, and erode over time and usually needs resurfacing or topping with gravel every few years. In West Texas, sun and alternating wet/dry cycles can accelerate surface cracking, so plan for maintenance like regrading, adding rock, and keeping surface drainage working.

Pick a drop zone clear of low branches, overhead lines, and delicate landscaping; lay down plywood or timber on lawn or narrow driveways to protect surfaces. Request tailgate spreading at checkout if needed, mark underground utilities before delivery, and avoid scheduling deliveries during heavy rain or extreme heat when compaction and spreading are more difficult.