Fill Dirt in Whitewright, TX

In the Whitewright area (West Texas), delivered fill dirt usually falls in a range of about $8 to $20 per ton, which converts roughly to $6 to $15 per cubic yard depending on how compacted and moist the material is. Final price depends on the supplier, haul distance, truck size, and whether spreading is requested; check your zip code on Hello Gravel for exact pricing and availability.

Hello Gravel partners with local quarries and independent haulers that serve Whitewright; specific supplier names and fees vary by zip code and daily availability. Typical minimums start at our 3-ton platform minimum, with delivery fees determined by distance, truck type, and site access—request a quote in checkout for exact supplier, minimums, and any delivery charges.

Calculate cubic yards as area (sq ft) x depth (ft) divided by 27, then multiply by 1.2 to 1.6 tons per cubic yard to convert to tons (moisture and compaction change the factor). Allow 10% to 30% extra for settling and compaction; for example, raising 500 sq ft by 6 inches = 500 x 0.5 / 27 = 9.3 yd3, which equals roughly 11 to 15 tons delivered depending on compacted density.

Fill dirt is suitable for raising grades and filling low spots in West Texas climates, but it is not usually the finished surface for driveways or exposed areas because it can be dusty and poorly drained. For driveways and slabs, use fill dirt as subgrade only and place proper base materials (road base or crusher-run) and compact thoroughly to handle heat, seasonal rain, and occasional freeze.

Standard practice for site preparation is to place fill dirt in 4 to 6 inch lifts and mechanically compact each lift; total compacted fill under driveways or slabs is commonly 6 to 12 inches depending on existing soils and load. For structural pads, contractors often aim for a firm, well-compacted base (typically 90% to 95% relative compaction) and may require geotechnical guidance for critical builds.

Fill dirt is an inexpensive, fine-grained material good for raising grades and filling holes but it drains poorly and can settle more than engineered aggregates. Crusher-run and road base are angular, well-graded mixes that compact tightly and provide better drainage and load-bearing for driveways and pads, while clean fill/topsoil contains organics and is not suitable for structural support.

If fill dirt is used to fill low spots, expect some settlement in the first year and plan for minor top-ups; covered and compacted fill under a proper base can last many years with low maintenance. Exposed fill dirt surfaces may erode with heavy rain, so stabilizing with grass, rock, or a finished gravel layer will reduce maintenance in Whitewright's seasonal rain and heat cycles.

Possibly. City of Whitewright, Grayson County, and local HOAs may have rules about grading, drainage, or changing lot elevations that affect fill dirt projects. Contact the city building department and your HOA before major grading or driveway work to confirm permits and stormwater requirements.

Whitewright soils can include clays and silty material that may expand, shrink, or hold water; choose low-organic, well-graded fill dirt with minimal roots and debris for best results. For sites with expansive clay or poor subsoil, consider engineered fill, a mix with gravel, or geotechnical advice to minimize future settling and erosion.

Yes. Deliveries are affected by site access (driveway width, overhead clearance), weather (heavy rain or freeze/thaw can delay deliveries), and supplier schedules; Hello Gravel standard delivery requires 2+ business days, with next-day options before noon CST for an extra fee. Minimum orders start at 3 tons and optional tailgate spreading is offered at the driver's discretion, so schedule early during wet or busy seasons.