Fill Dirt in Port Arthur, TX

Prices vary by supplier, distance from the pit, and order size, but most delivered fill dirt in Port Arthur runs roughly $8 to $25 per cubic yard (about $6 to $18 per ton) as a general range. Hello Gravel shows transparent, location-based pricing at checkout—we require a minimum order of 3 tons and standard delivery is 2+ business days; next-day options are available for orders placed before noon CST for an extra fee.

There are several local sand and gravel pits and haulers serving the Beaumont-Port Arthur area and Jefferson County; Hello Gravel connects you to those regional suppliers so you get materials sourced nearby. Typical quarry or pit minimums for a direct truckload are often one truck (about 10 to 15 tons), but Hello Gravel accepts orders from 3 tons and will show any small-load or delivery fees in checkout.

To raise 1,000 sq ft by 6 inches you need about 18.5 cubic yards of material. Using a typical fill dirt weight of roughly 1.2 to 1.5 tons per cubic yard, that equals about 22 to 28 tons (around 24 tons is a common estimate). For other depths: 3 inches is about 9.25 cubic yards, and 12 inches is about 37 cubic yards.

Port Arthur has a coastal climate and often higher groundwater, so native fill dirt can retain moisture, compress, and settle if not properly prepared. For good performance, compact in lifts, avoid using organic or topsoil as fill, add drainage layers (gravel or sand) where needed, and consider geotextile or underdrains for low-lying or saturated sites.

Local permits and weight limits can apply to oversized or overweight loads or deliveries to properties accessed by restricted roads or bridges; these are sometimes enforced by county or city public works. Hello Gravel coordinates with local haulers but you should check local ordinances, homeowner association rules, and ensure the delivery route and drop zone can safely accommodate a tri-axle dump truck.

For general yard-raising, typical fill dirt (subsoil with low organic content) is acceptable if compacted. For driveways, a granular base such as crusher run or road base is a better top layer because it drains and compacts well. For foundation backfill or structural work, use select or engineered fill specified by your engineer—these materials are tested for compaction and low settlement.

If properly compacted and covered with a suitable base and surface material, fill beneath a driveway can last many years, but poor compaction or inadequate drainage in Southeast Texas can cause settling within months to a few years. Routine maintenance includes checking for low spots, regrading or adding material after heavy rains, and keeping surface drainage away from the filled area.

Fill dirt is usually inexpensive subsoil used to raise grades; it may contain fines and variable clay content. Crusher run is crushed stone plus fines that makes a stable, draining base for driveways. Engineered fill is processed, tested, and compacted to meet structural specs and is recommended for foundations or load-bearing areas. Clean fill is free of debris and organic matter and is a good option where contamination or organics are a concern.

Measure your area and use the cubic yard and ton conversions to pick a quantity, check your zip code for local pricing, and note any site access constraints in Order Notes. Schedule at least 2 business days for standard delivery, request tailgate spreading at checkout if desired (driver will assess on arrival), and be on site or have someone available to confirm placement and access.