Fill Dirt in Haslet, TX

Fill dirt is mainly subsoil with clay, silt, sand, and very little organic material used to raise grade or fill low spots. In Haslet, fill dirt is appropriate for general grade changes, trench backfill, and creating slight elevation changes, but it is not an ideal finished surface for driveways or for drainage layers where free-draining rock is required.

As a rule of thumb, 1 cubic yard of typical fill dirt in North Texas equals about 1.2 tons. For a 10-by-20 foot shed pad at 4 inches thick you will need about 2.5 cubic yards (about 3 tons); a 1,000 square foot driveway with a 6-inch base needs roughly 15 cubic yards (about 18 tons); and regrading a low spot 6 inches deep on a 500-square-foot area uses about 9 cubic yards (about 11 tons). Always add 5-10 percent for compaction and settling when ordering.

Prices vary with availability, haul distance, moisture content, and season, but delivered fill dirt near Haslet commonly falls in the low double-digit per-ton range. Hello Gravel requires a 3-ton minimum and offers standard delivery in 2+ business days with a next-day option for orders before noon CST; for an exact local price get a quote through our site using your zip code.

Fill dirt is not usually graded like crushed stone; it contains fines and clay particles. For driveways and structural building pads in West Texas, contractors typically use a compactable 'structural fill' or a base mix with lean clay and crushed rock, or a separate crushed-stone base (#57 or crushed limestone) topped with compacted structural fill, to reduce settling and improve drainage.

Haslet's native clays can shrink and swell with moisture changes, and hot, dry summers speed surface drying and shrinkage, which can increase settling and cracking. To reduce movement, place fill in thin lifts, compact to engineering specifications (often 90-95% Standard Proctor for structural areas), and allow adequate moisture conditioning before final compaction.

Small deliveries and minor grading usually do not need permits, but significant land alteration, retaining walls, stormwater changes, or grading that affects drainage can trigger city or county permits. Check with the City of Haslet Public Works and Tarrant County permitting offices before large fills or changes to ensure compliance with local grading, drainage, and erosion control rules.

Yes. Hello Gravel connects customers with trusted local suppliers and contracted haulers in the North Texas area; many suppliers can also recommend local contractors for compaction and spreading. If you need vendor-installed compaction, ask for recommendations in your order notes or contact our sales team for guidance.

For structural areas like building pads and driveways, aim for 90-95% of Standard Proctor relative compaction as directed by a geotechnical report or local building code. Use plate compactors or walk-behind rollers for 3- to 6-inch lifts and a small vibratory roller for larger areas; always compact in thin lifts and confirm moisture content before compaction for best results.

Fill dirt is meant to raise grade and fill voids but drains poorly compared with crushed limestone or #57 rock. For septic drain fields, drainage layers, and driveway surfaces, crushed stone is preferred because it provides better drainage, load distribution, and long-term stability; use fill dirt only where drainage is not required and after consulting local septic or building codes.

Because North Texas storms can produce intense rainfall, use erosion controls such as silt fence, sediment basins, erosion-control blankets, and slope benches during and after placement. Place a geotextile fabric between fill dirt and underlying soils on steep slopes to reduce mixing, and revegetate or install mulch/blankets promptly to limit surface erosion.