Fill Dirt in Clint, TX

Delivered fill dirt prices in and around Clint typically vary depending on source and haul distance. Expect a broad range roughly $10 to $30 per ton (about $12 to $40 per cubic yard) for common fill dirt; exact price appears at checkout. Hello Gravel has a 3-ton minimum and may offer free delivery in some local routes, but remote or difficult-access drops can increase cost.

Hello Gravel connects customers to local quarries, sand and gravel pits, and recycling yards that serve Clint and El Paso County. Minimums depend on the supplier and truck size, but our platform has a 3-ton minimum and most local haulers run tri-axle trucks that carry larger loads; contact us if you need smaller quantities or supplier options. We can share specific supplier options and minimums once you enter your zip code.

West Texas heat, low rainfall, and common expansive clay soils can make fill dirt dusty, hard to compact if too dry, and prone to shrink-swell. That means loose fill can settle or crack seasonally and may not be a good long-term finish near foundations or driveways without proper compaction and moisture control. For structural work or close to buildings, contractors often use select or engineered fills and moisture-conditioning before compaction.

Typical u0022fill dirtu0022 has a lot of fines and is best for bulk grade-building but not for drainage. For better compaction and drainage in Clint, ask for select fill (sandy-loam or sand) or mix fill dirt with a coarse granular layer such as crusher run or washed sand beneath the finished surface. For driveway subgrades, contractors prefer road base or crusher run rather than plain fill dirt to ensure drainage and load-bearing capacity.

For structural fills near foundations or pavements, contractors commonly target about 90% to 95% of maximum dry density (per standard test methods); for general yard fill 85% to 90% may be acceptable. Typical lift thickness is 4 to 8 inches loose before compaction, using a plate compactor for small areas and a vibratory roller for larger jobs. Moisture conditioning (watering) is often required in West Texas to reach proper compaction.

Use this rule: cubic yards = (square feet * inches of depth) / 324, and a loose fill dirt weight of about 1.2 to 1.4 tons per cubic yard (we use 1.3 tons/yd3 as a practical estimate). Per square foot that equals about 0.008 tons for 2u0022, 0.012 tons for 3u0022, and 0.024 tons for 6u0022. For example, a 1,000 sq ft area needs roughly 8 tons at 2u0022, 12 tons at 3u0022, and 24 tons at 6u0022 (approximate; order a 5-10% overage for settling and compaction).

Labor and equipment prices vary with driveway size, access, and depth, but typical local ranges are about $400 to $1,200 to spread and properly compact fill dirt for a standard 2-car driveway (roughly 400 to 600 sq ft). Costs rise if heavy machinery, excavation, disposal of existing material, or grading/finish work are required. You can request an on-site quote through Hello Gravel or our contractor partners for a precise estimate.

In many cases small grading projects do not require special permits, but changes that affect drainage, floodplains, septic systems, or municipal right-of-way can trigger permitting with the City of Clint and El Paso County. Always check with the City of Clint building department or El Paso County before importing large volumes, and disclose if fill contains foreign soils or demolition debris. Also be mindful of dust control, erosion, and nearby watercourses when placing material.

Spring and summer are peak construction seasons in West Texas, so prices can climb and lead times can lengthen due to higher demand and dryer, dusty conditions that require moisture conditioning. Standard delivery timeline through Hello Gravel is 2+ business days, with next-day delivery available for orders placed before noon CST for an additional fee. Planning ahead and booking off-peak dates helps secure better rates and faster service.

Fill dirt is usually the cheapest option for bulk grade-building, but it does not compact or drain as well as crusher run or road base, making it a poor top layer for driveways. Crusher run and road base are engineered to lock together and bear vehicle loads, so they provide better durability and less maintenance for driveways in Clint. Decomposed granite is attractive for low-traffic, decorative driveways but also needs a stable base like road base underneath to perform well.

Deliveries to Clint are typically made by tri-axle dump trucks operated by local haulers; Hello Gravel shows delivery timing at checkout and requires a minimum 3-ton order. Drivers may offer tailgate spreading at their discretion; request the service in order notes but expect the driver to assess safety and access on arrival. Clear access, parked cars, and marked drop zone help ensure a smooth delivery.

For landscaping in Clint, top off with several inches of screened topsoil or amended soil before planting, since plain fill dirt lacks organic matter. Compact fills in lifts and keep water-management in mind—grade toward swales or retention areas to avoid ponding—because West Texas rains can cause rapid runoff. To reduce dust and erosion, seed, mulch, or use temporary gravel cover on exposed fills until vegetation is established.