Fill Dirt in Boerne, TX

Prices vary by supplier, but in Boerne you can typically expect fill dirt delivery to fall in the low end of aggregate pricing—roughly $6 to $16 per ton delivered depending on distance, site access, and haul volumes. Hello Gravel shows clear pricing at checkout and has a 3-ton minimum; for an exact delivered price enter your zip code or request a quote.

Hello Gravel has a 3-ton minimum order across our network, which covers most small homeowner jobs. Local suppliers and contractors often have higher minimums (10 to 20 tons) for onsite deliveries, so larger contractor orders should be requested through our platform to see supplier-specific minimums.

For Boerne's clay-prone soils, compact in thin lifts (3 to 6 inches) and use water to reach optimum moisture before compaction. Small areas do well with a plate compactor or walk-behind roller; larger or load-bearing areas should be compacted with a vibratory smooth drum roller or sheepsfoot roller and tested to confirm 90% relative compaction when required.

Plain fill dirt alone is not recommended as a finished driveway surface because it can rut, settle, and erode in Boerne's heavy rains. If used as subgrade, cover with a structural driving layer like crusher run or crushed stone; expect to inspect and regrade low spots after major storms and plan on topping the surface every 1 to 3 years depending on traffic and drainage.

Fill dirt density varies, but a practical conversion for planning in Boerne is about 1.2 to 1.5 tons per cubic yard loose (and 1.4 to 1.7 tons per cubic yard when compacted). That means 1 cubic yard ≈ 1.2–1.5 tons, and 1 ton ≈ 0.67–0.83 cubic yards; ask your supplier for the exact weight used for their mix to avoid shortfalls.

Hot, dry summers in Boerne can make clay-rich fill dirt shrink and crack, while intense rain events and flash floods can cause erosion, washouts, and uneven settling. Mitigate risks with proper compaction, slope grading to shed water, temporary erosion control (straw, silt fence), and surfacing or stabilization where traffic or drainage is a concern.

Common alternatives include select fill (engineered compactable soil), crusher run or gravel for drive surfaces, screened topsoil for landscaping, and recycled concrete fines. Fill dirt is usually the least expensive per cubic yard; recycled concrete and crusher run cost more but provide better drainage and load-bearing performance—ask Hello Gravel for side-by-side quotes for your zip code.

Standard delivery through Hello Gravel is 2+ business days, with next-day delivery available for orders placed before noon CST at an extra fee. Same-day delivery may be possible for local contractors depending on supplier and truck availability, but it is not guaranteed—contact our team for expedited requests and confirmation.

Recycled materials like crushed concrete fines and blended fills are often available in the West Texas market, but availability depends on local suppliers. For structural or environmentally sensitive uses (septic drain fields, public right-of-way), check local codes and permits—municipal regulations may restrict certain recycled materials, and suppliers should be able to provide source documentation.

Labor and equipment rates vary by job size and site access; expect contractors to charge roughly $0.50 to $1.50 per square foot for spreading and compacting typical shallow fills, or $75 to $150 per hour for crew and equipment on smaller projects. For accurate pricing, get itemized quotes that show hauling, spreading, rolling, and any prep work such as vegetation removal or geotextile installation.

Confirm the material description (clean fill vs. topsoil or screened fill), ask for a delivery ticket showing tons or cubic yards delivered, and note that regional color and texture vary due to local geology. Request delivery photos if site access is tight, schedule deliveries outside heavy rain forecasts, and contact Hello Gravel early to check availability and lead times for your zip code.