Skip to main content

Base Materials

We deliver every grade

Base Materials Crushed Stone

Crushed stone is rock broken down at a quarry and screened into sizes. The pieces are angular, so they bite into each other under weight and hold shape instead of shifting. That's why it's the go-to base under driveways, patios, and sheds.

"Base" describes the job the rock does. It doesn't say what kind of rock you're getting. You'll see crushed stone base sold by ASTM D448 number like #57, #67, or #89, where each number is a size range from the sieve chart. A cubic yard weighs about 1.4 tons, so a 10-yard load runs around 14 tons on the truck.

2
named grades in this family
2
we can put on a truck

Compare every grade

GradeSizeShapeWashedTop useWe deliver
Crushed Stone (#4 To 1″)1.5" to 3/4"AngularDriveway baseWe deliver it
Crushed Stone (2″, Ballast)2"AngularRailroad track supportWe deliver it

What people use it for

Driveway base under gravel or asphaltPaver and patio baseShed and outbuilding padsWalkway and path baseTrench backfill around drain pipeSub-base under concrete slabs

How to choose within base materials crushed stone

Under pavers or concrete

A crushed base — usually 3/4" minus — compacts to a solid, load-bearing pad. Uniform depth matters as much as the material.

Under a shed or hot tub

Compact 4 to 6 inches of base material. More for anything that will sit long-term.

Driveway base

Crushed limestone or road base underneath, topped with a decorative or wear layer.

Material calculator

How much base materials crushed stone do you need?

Pick a grade, tell us your area and depth, and we'll work out the tons plus your delivered price.

Area shape

Dimensions

Depth

shed base
Your estimate

Enter your area to see the math

Pick a material, shape and dimensions and we'll calculate the tons you need plus your delivered price.

Other base materials families

Aggregate Base Course

We deliver

Aggregate base course, or ABC, is a dense-graded crushed stone mix.

191 grades

Road Base

We deliver

Road base is crushed rock mixed with stone dust, sized from about 3/4 inch down to fines.

56 grades

Top Course

We deliver

Top course is the finish layer on a gravel driveway or road.

5 grades

Base Materials Fill Material

We deliver

Fill material is loose dirt, sand, or crushed rock you dump to raise a low spot or plug a hole in the ground.

4 grades

Base Materials Sand

We deliver

Sand is rock ground down into loose grains, usually between 0.075 mm and 4.75 mm across.

4 grades

Base Materials 10 Stone

We deliver

#10 stone is crushed rock screened to 3/8 inch and smaller, with all the fine dust left in.

3 grades

Base Materials Gravel

We deliver

Base gravel is crushed rock with all the dust and small chips left in.

3 grades

Paver Base

We deliver

Paver base is crushed rock that runs from about 3/4 inch down to a fine dust, all mixed together in one load.

3 grades

Base Materials 4 Stone

We deliver

#4 stone is crushed rock roughly 3/4 inch to 1 1/2 inches across, with the fines washed out.

2 grades

Subbase

We deliver

Subbase is the layer of rock that sits between the raw ground and your base gravel.

2 grades

Base Materials 11 Stone

We deliver

#11 stone is crushed rock screened from about 1/2 inch down to 1/4 inch, with most of the dust washed out.

1 grade

Base Materials 2 Stone

We deliver

#2 stone is crushed rock with pieces roughly 1.5 inches to 2.5 inches across.

1 grade

Browse all base materials families →