Fill Dirt in Crestview, FL

Fill dirt is subsoil with little organic matter used to raise grades and fill low spots. In Crestview it often reflects West Florida soils—tan to brown, sandy with occasional clay or shell fragments—and tends to be coarser and less fertile than topsoil.

Prices vary by supplier, quantity, and delivery, but in Florida fill dirt commonly runs roughly $10 to $30 per cubic yard (or about $10 to $40 per ton) delivered. Exact pricing for Crestview depends on local supply and trucking; Hello Gravel requires a 3-ton minimum and provides a delivered quote for your zip code.

Yes, fill dirt is generally cheaper than topsoil because it contains little organic material and is used for bulk filling rather than planting. If you need soil for gardens or lawns, plan to put topsoil over the fill dirt or amend the surface for planting.

A typical tri-axle dump truck carries about 12 to 16 cubic yards loose, so multiply the per-yard price by the truck capacity to estimate cost. For example, at $15 per cubic yard a 14-yard load would be about $210, plus any delivery fee; Hello Gravel will provide a firm delivered price when you order.

A full-size pickup bed typically holds roughly 1 to 1.5 cubic yards of loose material depending on bed length and whether you load above the bed sides. Also check your truck’s payload capacity—fill dirt is heavy and can exceed safe weight limits if overfilled.

One cubic yard is a 3 ft by 3 ft by 3 ft cube (27 cubic feet). Visually, it’s enough to form a small pile about the size of a large patio cube or to raise a 100 sq ft area by about 3.25 inches.

Coverage depends on depth: at 1 inch depth 1 cubic yard covers about 324 sq ft, at 2 inches about 162 sq ft, and at 6 inches about 54 sq ft. For landscaping or grading work in Crestview, pick the depth you need and calculate accordingly.

Multiply your local per-yard price by 20 and add delivery. For example, at $15 per cubic yard 20 yards would be about $300; at $30 per yard it would be $600—your actual Hello Gravel quote will reflect local rates, truck size, and delivery distance.

Yes, fill dirt is commonly used to raise and level yards, fix low spots, and build up grades for drainage. Make sure to compact layers in 4- to 8-inch lifts, avoid using raw fill dirt as a final planting surface, and consider professional guidance if you have drainage or utility concerns.

Alternatives include topsoil (for planting), sand (good in sandy subsoils for some applications), crushed stone or aggregate (for structural base and drainage), and engineered or structural fill for load-bearing work. Choose based on whether you need planting soil, drainage, or a compactable structural layer.

You can place pea gravel on fill dirt, but expect it to settle and sink over time unless you prepare a stable base. For best results in Crestview, compact the fill, add a layer of crushed stone or sand, and consider a geotextile fabric and edging to keep the gravel from migrating.

Pea gravel can migrate, sink into loose fill, and allow weeds unless a proper base and fabric are used. It is also loose underfoot and can shift near slopes or drainage paths—consider edging and a compacted base to reduce those issues.