Fill Dirt in Riverside, FL

Delivered fill dirt in the Riverside area commonly ranges from about $12 to $35 per cubic yard, depending on distance, material type, and site access. Per-ton pricing is often about $10 to $25 per ton (1 cubic yard of fill dirt typically weighs about 1.2 to 1.4 tons). A standard tri-axle dump truck load (10–14 cubic yards) usually runs roughly $150 to $500 delivered. Prices vary by supplier and season, so check your zip code and get a quote for an exact cost.

Yes — fill dirt is usually cheaper than topsoil because it has little to no organic matter and is not screened for planting. Compared with gravel, fill dirt is often less expensive per cubic yard, but gravel performs better for driveways, drainage, and structural sub-bases, so cost should be weighed against the intended use. For planting or lawns, topsoil is the right choice despite the higher price.

Most local dump trucks used for Hello Gravel deliveries in the Florida Region are tri-axle end-dumps that carry about 10 to 14 cubic yards loose (many fall near 12 cubic yards). Using a typical fill-dirt density of about 1.2 to 1.4 tons per cubic yard, that equals roughly 12 to 20 tons per load, depending on the truck and material. Heavier or denser fills and different truck types will change those numbers, so ask your supplier for the exact truck capacity.

One cubic yard equals 27 cubic feet, so it covers about 162 square feet at 2u0022 depth, 81 square feet at 4u0022 depth, and 54 square feet at 6u0022 depth. Expect some settlement and compaction after placement, so plan to order 5% to 10% extra material for grading or backfill. For precise projects, use our material calculator or contact our team with project dimensions.

Most big-box retailers in Riverside primarily sell bagged soil products and topsoil; bulk fill-dirt availability through those stores is limited and usually requires special order or a local landscape supplier. For bulk deliveries by dump truck, local landscape yards and aggregate suppliers are the common source. Hello Gravel connects customers to local suppliers that handle bulk loads and scheduled delivery.

In Riverside you’ll commonly find screened fill, sandy-clay fill, and structural fill that reflects local Florida geology (sandy materials with occasional shell or limestone fines). Screened/structural fill is generally suitable for backfill and grading when properly placed and compacted. For driveway subbase you should prefer crushed rock or gravel because fill dirt does not drain well and does not provide the same load-bearing surface.

Fill dirt tends to hold moisture, compacts unevenly, and can rut under traffic, so it performs poorly as a surface or subbase for driveways compared with gravel. Florida’s high rainfall and sometimes shallow water table make drainage a major concern — fill dirt can worsen drainage issues unless paired with proper base rock and drainage features. For long-lasting driveways and reliable drainage, use a compacted crushed-stone base and drainage swales rather than only fill dirt.

Hello Gravel’s platform lists a minimum order of 3 tons, which is roughly 2 to 3 cubic yards depending on material density. Some local suppliers offer smaller pickup loads or palletized soil, but those options are less common and may carry higher per-unit pricing or pickup requirements. If you need a smaller amount, contact our team and we’ll check local supplier options and pricing for small loads or special delivery trucks.

Clear the drop area of vehicles, low branches, and obstacles and mark the preferred dump spot with flags or spray paint so the driver can see it from the road. Call 811 to mark underground utilities before placing heavy material or machinery, choose a stable access route (avoid very soft or wet turf), and note that tailgate spreading can be requested at checkout but is performed at the driver’s discretion. If the site is wet or inaccessible, delivery may be delayed or require a different truck type.

Contact Hello Gravel customer service promptly with photos and details of the issue so we can work with the local supplier to resolve it. Because materials are regionally sourced, texture and color may vary from photos; we will review options and next steps according to our policies and the supplier’s availability. For refunds or adjustments, refer to the refund policy and contact our team as soon as possible.