Fill Dirt in Boggy Creek, FL

Fill-dirt is native soil without topsoil, roots, or organic material used to raise grade, backfill foundations, or fill low spots. In Boggy Creek you typically use fill-dirt for grading yards, raising building pads above seasonal high water, or creating a base before topsoil or gravel. It is not a finish surface for landscaping because it compacts and can settle over time.

Delivered prices in the Boggy Creek area commonly range from about $20 to $45 per cubic yard depending on local supply, haul distance, and site access. This is an estimate only; final price can shift with seasonal demand, truck availability, and whether the load meets our 3-ton minimum. Contact our team or check your zip code for an exact delivered quote.

Material-only cost for plain fill-dirt in Florida is often around $8 to $25 per cubic yard, excluding delivery and handling. Prices vary with local source quality and whether the dirt is screened or contains clay. Adding delivery through Hello Gravel will increase the total to the delivered range above.

A typical dump-truck load (loose) in our Boggy Creek service area runs roughly $250 to $1,000 per load depending on truck size, distance, and material volume. Per-ton delivered pricing commonly falls in the $15 to $40 per ton range when converted from the delivered cubic-yard price. Exact figures depend on payload, local weight limits, and any access fees.

Most local tri-axle dump trucks we use carry about 10 to 14 cubic yards of loose fill-dirt. A good rule of thumb for weight is 1 cubic yard ≈ 1.2 to 1.4 tons for typical compacted fill-dirt in Florida, so a truck can be roughly 12 to 18 tons depending on moisture and soil type. Actual payloads may be limited by local axle-weight rules and the hauler's equipment.

Yes. Bulk fill-dirt delivered by the truck is almost always cheaper per cubic yard than the equivalent in bags when you need more than a small amount. Bagged dirt is convenient for small jobs but becomes much more expensive and slower to install for yard-scale grading or fill projects.

Fill-dirt is typically less expensive than gravel; you might expect gravel to cost $10 to $30 more per cubic yard delivered because it is mined, crushed, and screened. Gravel is a better structural base for driveways, while fill-dirt is used to raise grades; the extra cost for gravel often pays off in reduced maintenance for drive surfaces. Ask our team if you need a combined delivery of both materials.

Extra charges are common for long, unpaved driveways, soft or steep access, or when trucks must back far off the road; typical off-road or access fees range from $25 to $150 depending on difficulty. Narrow streets or tight turnarounds can incur additional fees if specialized trucks or spotters are required. We recommend adding details and photos in the Order Notes so suppliers can provide an accurate total.

Labor for spreading and grading varies: a laborer crew might charge $50 to $100 per hour, while equipment (skid steer or small excavator) typically rents with an operator for $75 to $150 per hour. Some contractors price by the yard at roughly $5 to $15 per cubic yard to spread and lightly compact. Hello Gravel offers tailgate spreading at the driver's discretion, but for reliable grading hire a local landscaper or excavator.

Boggy Creek and much of Florida have sandy native soils and a relatively high water table, so ordinary fill-dirt can settle and drain quickly; areas with organic topsoil or reclaimed wetlands need more structural fill and compaction. If you are building pads or near standing-water areas, ask for engineered or compactable fill and factor in extra volume for compaction and settlement. When in doubt, have a local contractor or engineer confirm the material type and compaction requirements.

Fill-dirt will settle over time and can retain water in low spots, which can lead to additional top-up deliveries, regrading, or drainage fixes. Gravel is more stable for driveways and reduces erosion, but it can migrate, require periodic regrading, and may need weed control or edging. Both materials have maintenance costs; choose fill-dirt for grade-building and gravel for finished, drained surfaces.

Use the formula: cubic yards = (length in feet × width in feet × depth in feet) ÷ 27. To convert to tons, multiply cubic yards by about 1.3 (this is a typical conversion for Florida fill-dirt; use 1.2–1.4 for accuracy). For example, a 50 ft × 10 ft area filled 6 inches deep needs (50×10×0.5) ÷ 27 ≈ 9.26 cubic yards, or roughly 12 tons; you may want to order 5–10% extra to allow for compaction and spillage.

Yes, local county or city rules can affect large fills, especially near wetlands, floodplains, or stormwater systems, and some projects require permits or engineered plans. Homeowners associations may also limit grading or visible changes to lot elevation. Check with your county planning or public works office before ordering large volumes and mention any permitting needs to our team.

Prices can vary seasonally: heavy rain seasons and peak construction months can raise prices and limit truck availability, while slower periods (often late fall and early winter) may offer better rates. Keep in mind that Florida weather affects scheduling; wet conditions can delay deliveries or increase access fees. For faster service, plan ahead and allow our 2+ business day standard delivery window, or request next-day delivery before noon CST for an extra fee.