Fill Dirt in Odessa, FL

Delivered fill dirt in Odessa commonly ranges from about $15 to $35 per cubic yard depending on the supplier, distance, and driveway access. Price varies with material type (clean fill vs mixed), quantity, and whether delivery requires special placement. For an exact number, get a quote through our site using your zip code.

Yes, we deliver fill dirt to residential addresses in West Florida, including Odessa, using local suppliers and tri-axle dump trucks. Standard delivery is typically included or low-cost in many areas, but fees can vary by distance, access, and order size; standard lead time is 2+ business days and next-day delivery is available for orders placed before noon CST for an extra fee. Note that placement is limited by truck access and drivers will assess safe dumping locations on arrival.

To raise 1,000 square feet by 6 inches you need about 19 cubic yards (1,000 sq ft x 0.5 ft = 500 cubic ft; 500 / 27 = 18.5 cu yd). We recommend ordering 10 to 20 percent extra to allow for compaction and settling, so plan to order about 21 to 23 cubic yards. Use our material calculator or contact sales for help with exact quantities.

For grading and under-slab work, fill dirt is usually the better and cheaper choice because it contains less organic matter and compacts more predictably than topsoil. Topsoil is intended for planting and contains organic material that can shrink and settle, so it is not recommended under slabs or for structural backfill. For structural or load-bearing needs you may still need engineered or compacted fill per your engineer's specifications.

Suppliers may deliver loose or partially compacted fill dirt, but on-site compaction is not a standard service provided by Hello Gravel and is not guaranteed. Drivers may offer limited tailgate spreading at their discretion, but they do not provide mechanical compaction. For proper compaction you should hire a local contractor or rent compaction equipment to meet project or inspector requirements.

Odessa is in Hillsborough County, and large fills, regrading, work in floodplains, or projects affecting drainage or wetlands may require permits or review by Hillsborough County Building and Development Services. Always check local zoning and stormwater rules before starting major grading or importing large volumes of fill to avoid code or environmental issues. For projects near wetlands, conservation areas, or public drains, contact the county for guidance.

Our platform's minimum order is 3 tons, and most fill dirt deliveries in West Florida follow a standard lead time of 2+ business days. Next-day delivery is available for orders placed before noon CST for an additional fee, subject to supplier availability and access conditions. Confirm timing and any minimums in checkout or by contacting our sales team.

Hello Gravel does not perform routine lab testing on all loads, but many local suppliers can provide documentation or sell certified 'clean fill' when requested. For residential construction, foundation work, or projects near potential contamination sources, we recommend asking suppliers for certificates and arranging independent testing if your contractor or local code requires it. Our sales team can help note test or clean-fill requests on your order.

Fill dirt is not recommended for a long-lasting driveway base because it tends to retain water and does not provide the structural drainage and load-bearing needed for vehicle traffic. For driveways in West Florida's wet climate, use crushed stone or a compacted gravel base with proper drainage and geotextile fabric when required. Fill dirt can be used for leveling subgrades outside the travel surface but should be followed by a proper aggregate base.

Some local suppliers offer screened or landscaping-grade fill dirt that contains fewer rocks and debris, and they may be able to deliver topsoil and fill dirt in separate loads. Mixing materials on delivery or having the driver blend loads is not guaranteed and should be requested in Order Notes; we recommend scheduling separate deliveries or pre-mixing before delivery for quality control. Contact sales to specify screened material, screening level, or mixing preferences ahead of scheduling.

The weight of fill dirt varies with moisture and composition, but a typical range is about 0.8 to 1.4 tons per cubic yard. Because weights vary, use cubic yards for volume planning and our material calculator to convert between tons and cubic yards, and always order a little extra for compaction and settlement. If you have access limits, slope concerns, or need a certified clean fill, note that in your order and speak with our team for tailored guidance.