Fill Dirt in Wesconnett, FL

Typical prices for fill-dirt in the Wesconnett area run roughly $15 to $40 per cubic yard, which often translates to about $12 to $30 per ton depending on moisture and composition. Final price depends on material quality (screened vs. rough), distance from the supplier, and delivery fees; Hello Gravel has a 3-ton minimum and standard delivery of 2+ business days, with next-day available for orders placed before noon CST for an extra fee.

In most cases yes: basic fill-dirt used for grading and backfill is typically less expensive per yard than decorative gravel or crushed stone in Wesconnett. The two serve different purposes though, so choose fill-dirt for raising grade or structural backfill and gravel for drainage or finished surfaces.

A typical tri-axle dump truck (commonly used in our network) carries about 10 to 14 cubic yards of material, roughly 10 to 18 tons depending on moisture and soil type. Truckload cost in Wesconnett usually ranges from about $200 to $800 per load depending on quantity, distance, and unloading logistics; specific pricing and delivery windows are provided at checkout.

Not usually — gravel and fill-dirt serve different functions: fill-dirt compacts and provides a stable base for landscaping, foundations, and utilities, while gravel is used for drainage and surface material. In Wesconnett's sandy, sometimes high-water-table soils, gravel can help drainage but won’t substitute where compactible fill or engineered backfill is required.

One cubic yard equals 27 cubic feet. Spread evenly, 1 cubic yard will cover about 108 square feet at 3 inches depth (or 324 square feet at 1 inch); because 1 ton of fill-dirt in local Florida material is roughly 0.8 to 1.3 cubic yards, one ton will cover about 80 to 140 square feet at a 3-inch depth depending on moisture and composition.

Drivers may perform tailgate spreading at their discretion and if requested at checkout, but this is not guaranteed and depends on site access and safety. Compaction for structural work should be done with appropriate equipment (plate compactor or roller) by you or a hired contractor; we recommend budgeting for compaction on projects that require stable, load-bearing fill.

Possibly — adding large volumes of fill, changing grade, or altering drainage can trigger local permitting or zoning review in Jacksonville/Wesconnett. Check with Jacksonville’s building and permitting office for projects that affect lot elevations, drainage, or that involve more than minor grading; Hello Gravel can help estimate quantities but permit compliance is the customer’s responsibility.

It depends on the scope: general laborers in the area often charge less, but $100 per hour can be reasonable for a skilled operator with a skid-steer, excavator, or compaction equipment, or for licensed contractors handling grading and site prep. Get written quotes itemizing labor, equipment, and compaction to compare, and consider renting equipment yourself if you have the skills to reduce costs.