Fill Dirt in Lutz, FL

Delivered fill dirt prices in Lutz typically range from about $20 to $45 per cubic yard, depending on the type (clean vs. sandy), distance from the supplier, and truck access. Regional factors like local quarry availability and seasonal demand also affect price, so get a live quote through Hello Gravel for an exact delivered rate.

For a 10–15 cubic yard load in Lutz, expect total contractor charges (delivery plus labor to tailgate-spread) to commonly fall between $400 and $1,200. Actual cost depends on truck access, slope and site prep, whether compaction is required, and whether the driver can safely do spreading (this service is at the driveru0019s discretion).

At typical delivered rates in West Florida, 20 cubic yards of fill dirt will generally cost in the $400 to $900 range before any additional spreading or compaction work. Larger orders often lower the per-yard price, but final cost depends on your driveway access, required permits, and any delivery fees for tight or long-distance drops.

Use this formula: cubic yards = (square feet x depth in inches) / 324. For example, to raise 1,000 square feet by 4 inches you need about 12.35 cubic yards, so order at least 10-15% extra to allow for settling and grading errors.

Many full-size pickup beds can hold roughly 1 to 2 cubic yards of loose fill, but safety and local rules apply: secure the load, avoid overloading the axle, and prevent spillage on roads. For larger amounts, messy material, or long drives, bulk delivery by dump truck through Hello Gravel is usually safer and more convenient.

Use fill dirt to raise grade or fill low spots where structural support is needed, but use topsoil for planting and landscaping because it holds nutrients. For driveways, a compacted gravel base over engineered fill or clean fill provides better drainage and durability than loose fill dirt alone. Consider local sandy soils and drainage in Lutz; contractors often combine fill dirt for grade, then gravel and a compacted surface for driveways.

1 cubic yard = 27 cubic feet, so at 2 inches it covers about 162 square feet, at 4 inches about 81 square feet, and at 6 inches about 54 square feet. Use these numbers to estimate materials quickly and then round up to allow for compaction and grading waste.

Local suppliers typically offer clean fill (no organic matter), screened fill, engineered structural fill, and sand/clay mixes tailored to Florida soils. Clean or sand-dominant fill is usually cheaper, while engineered, tested, and compactible fills cost more because they meet compaction and building-code requirements for foundations and pavements.

Yes, suppliers and quarries often provide lower per-yard pricing for larger orders, and local borrow pits or nearby quarries can reduce haul distance and cost. Check your zip code on Hello Gravel to see available local suppliers and request multiple quotes to find the best bulk pricing.

Permit and compaction requirements depend on the project scope and whether you are changing drainage or building structures; small yard grading often does not require a permit, but drives, retaining walls, or structural fills may. Check with Hillsborough County or Pasco County building departments (depending on your property) and consider a geotechnical recommendation if you need engineered fill or compaction to 90-95% standard proctor for structural work.

Clear a safe drop zone, mark any no-dump areas with flags, and call 811 for utility locates before the truck arrives. Make sure the truck has adequate access and communicate any request for tailgate spreading at checkout, remembering that drivers perform spreading at their own discretion and may decline for safety reasons.