Fill Dirt in Clermont, FL

Typical delivered prices for basic fill dirt in Clermont run roughly $25 to $55 per cubic yard, depending on truck size, distance from the local pit, and whether you add tailgate spreading or other services. If you need next-day delivery, spreading, or engineered/compacted material, expect the higher end of that range plus any service fees. Prices vary by supplier and seasonal demand, so check our quote tool for an exact cost to your zip code.

A standard tri-axle dump truck in the Clermont area typically holds about 10 to 12 cubic yards of loose fill dirt, and delivered price for a full truckload commonly ranges from about $300 to $700. Final price depends on distance, site access, permit requirements, and any requested spreading or offloading services. Hello Gravel shows truckload pricing in checkout and can confirm exact truck size and cost for your address.

Use this formula: cubic yards = (square feet x depth in inches) / 324. For 1,000 sq ft raised 6 inches that equals about 18.5 cubic yards of fill dirt. Because fill dirt density varies with moisture and soil type, that equals roughly 22 to 26 tons; contact us for a precise estimate based on local material density.

One cubic yard equals 27 cubic feet, so at 2 inches deep it covers about 162 sq ft, at 4 inches about 81 sq ft, and at 6 inches about 54 sq ft. A ton of fill dirt typically equals about 0.7 to 0.9 cubic yards depending on moisture and composition, so one ton will cover roughly 113 to 146 sq ft at 2 inches. When in doubt, use our material calculator or ask our team to convert for your specific project and material type.

No, 2 inches of fill dirt is not sufficient for a driveway. Fill dirt is intended for grade raising and backfill, not as a driving surface; a proper driveway needs a compacted structural base of 4 to 6 inches of crushed stone or more (8 inches or greater for heavy loads) on a well-prepared subgrade. In Clermont's rainy climate you also need good drainage and compaction to avoid settling and rutting, so plan on a crushed-stone base rather than just fill dirt.

Use fill dirt when you need to raise grade or backfill around foundations and utilities; it is usually cheaper per cubic yard than crushed stone. For driveway bases choose crushed gravel or stone because it drains and compacts into a stable surface; gravel also resists washout better in Clermont's frequent rain. For structural backfill or near foundations consider engineered fill and compaction rather than loose fill dirt.

Parts of Central Florida, including areas around Clermont, can have localized karst and sinkhole risk due to the region's geology. For small landscaping fills you can often use compacted fill dirt, but for building pads, large fills, pools, or near depressions you should hire a geotechnical engineer and use engineered fill with specified compaction. We recommend professional testing and engineered recommendations for any project that affects structural safety.

Ordering by the full truckload from a local supplier and scheduling a single delivery is usually the most cost-effective approach because it avoids multiple delivery fees. Check Hello Gravel for local suppliers, compare quotes, and consider pickup only if you have a suitable vehicle and permit; remember our minimum order is 3 tons. Also plan your access and permits ahead of delivery to avoid extra return trips and fees.

Fill dirt is different from topsoil and garden mixes, but many local suppliers that deliver fill dirt also offer topsoil blends such as 70/30 mixes. If you want a blended soil for planting, select the topsoil product in checkout or add it to your order notes; if you only need structural fill, stick with fill dirt to control compaction and cost. We recommend ordering separate materials for planting beds versus structural fills to avoid mixing purposes.

Some local haulers and contractors in the Clermont area offer spreading and light grading at an extra charge, and drivers may perform tailgate spreading at their discretion if requested at checkout. However, spreading, grading, and mechanical compaction are not guaranteed services from delivery drivers, so for reliable compaction and grading you should hire a local contractor or ask your supplier for a combined service quote. When in doubt, request compaction instructions in your order notes and confirm any additional fees before scheduling delivery.