Fill Dirt in Wenatchee, WA

Delivered fill-dirt prices in Wenatchee typically depend on source, hauling distance, and whether the material is screened or clean. As a ballpark, expect roughly $12 to $30 per ton (about $15 to $40 per cubic yard) delivered, with small orders and special requests pushing the high end. Hello Gravel has a 3-ton minimum and uses local dump trucks for delivery; final price is shown at checkout for your zip code.

For driveways and any load-bearing backfill, use a well-graded, low-organic fill (clean fill-dirt or structural fill) and place it in lifts no deeper than 6 inches loose. Compaction should be engineer-specified for foundations, but typical residential targets are 90% to 95% of Standard Proctor for driveway bases and foundation backfill; non-structural landscape fills can be lower (85% to 90%). When in doubt, follow your engineer or local permit requirements for Wenatchee projects.

Wenatchee has cold winters and spring freeze-thaw conditions that can cause frost heave and settling in fines-rich or organic fill-dirt. Crushed rock or clean granular structural fill drains and sheds water better and is much less prone to frost-related movement, so it is usually a better choice for base layers under driveways, sidewalks, or building pads. If using fill-dirt, improve drainage, remove organics, compact properly, and consider a granular layer beneath frost-sensitive areas.

Yes, filling near waterways, irrigation ditches, or riparian buffers often triggers rules and permitting from City of Wenatchee, Chelan County, and the Washington State Department of Ecology. Orchard land and irrigation infrastructure can have additional restrictions and concerns about herbicide residues or nutrient impacts, so contact local planning or conservation districts before placing large volumes of fill. Hello Gravel recommends checking permits and describing the project in Order Notes so suppliers can advise on suitable materials.

Use this quick rule: one cubic yard covers about 81 sq ft at 4 inches depth. Examples: a 12 ft by 50 ft driveway patch at 4 inches needs roughly 7.4 cubic yards; raising 1,000 sq ft by 6 inches requires about 18.5 cubic yards; a 10 ft by 20 ft pad at 6 inches needs about 3.7 cubic yards. Convert to tons roughly by using 1.1 to 1.3 tons per cubic yard for typical fill-dirt, and use Hello Gravel's material calculator or contact our team for a site-specific estimate.

Clear the drop zone of vehicles, low-hanging branches, and visible irrigation lines and mark utilities if you are in doubt; narrow or steep access in Wenatchee neighborhoods and orchards may limit truck placement. Tell us any access constraints in Order Notes so drivers and suppliers can plan the best drop location. If you need spreading, request tailgate spreading at checkout and know drivers perform it at their discretion.

Material reflects local geology and topsoil, so color and texture of fill-dirt in Wenatchee can range from sandy loam to silty loam with visible rock fragments. Ask for 'clean' or screened fill if you need low-organic material free of topsoil and debris, and note color preferences in Order Notes though exact matches cannot be guaranteed. Suppliers in the Yakima/Wenatchee region may offer different blends, so ask for a description or sample photo when ordering larger loads.

For structural work (foundations, loaded pads, public improvements), jurisdictions or engineers commonly require density testing such as Standard Proctor or in-place nuclear density tests to verify compaction. For small landscape fills, you can achieve good results by placing fill in 4 to 6 inch lifts and compacting each lift with a plate compactor or roller until the surface is firm. If your project is subject to permits or engineering, arrange testing through your engineer or a geotechnical contractor.