Fill Dirt in East Wenatchee, WA

Hello Gravel connects you with trusted local suppliers and haulers serving East Wenatchee, including small gravel pits and regional quarries in Douglas and nearby Chelan/Yakima counties. We coordinate quotes, schedule delivery, and let you pick the supplier option that fits your timing and budget; check your zip code on our site for exact supplier availability.

Delivered fill-dirt prices around East Wenatchee commonly fall in the range of about $12 to $25 per cubic yard, or roughly $9 to $18 per ton, depending on distance, moisture content, and material cleanliness. Final cost varies by supplier, delivery access, and order size, so use our quote tool or contact our team for a location-specific price.

Typical local dump trucks deliver roughly 10 to 15 cubic yards per load; using a conversion of about 1.3 tons per cubic yard for fill-dirt, that equals about 13 to 20 tons per truck. Hello Gravel has a 3-ton minimum order; many deliveries include free standard delivery, but fees can apply for next-day service, long driveway/backyard access, or special placement requests.

Fill-dirt is usually a mix of sand, silt, and fines and is intended for raising grades and backfill; it should be clean and free of organic debris. For driveway bases and building pads in East Wenatchee you generally want a well-graded granular base (crusher-run or road base) rather than straight fill-dirt; fill-dirt can be used to build up elevation but should be capped with appropriate base material for structural or traffic-bearing applications.

For structural areas in freeze-thaw zones, aim for 90% to 95% of Standard Proctor density and place fill in 6- to 8-inch lifts while controlling moisture. Use vibratory plate compactors or jumping jacks for small DIY areas and a vibratory drum roller or trench roller for larger or contractor jobs; proper compaction and drainage are key in central Washington's seasonal freeze-thaw cycles.

To raise 1,000 sq ft by 3 inches you need about 9.3 cubic yards, which is roughly 12 to 13 tons of fill-dirt using a 1.3 tons/yd3 conversion. To raise a 20x40 area (800 sq ft) by 6 inches you need about 14.8 cubic yards, or around 19 to 20 tons; use our material calculator for quick, location-adjusted estimates.

Fill-dirt is best for bulk grade adjustments and backfill when free of organics but is not a substitute for structural base materials. Crusher-run or road base are recommended for driveways and load-bearing surfaces because they compact tightly and shed water, while engineered fill (specified gradation and compaction) is required for building pads and foundations where an engineer or code demands specific properties.

Local roads and bridges may have posted weight limits, and oversized or overweight deliveries can require permits from Douglas County or the City of East Wenatchee; rules vary by route and job size. Before scheduling a large truck delivery, check with your local public works office and tell our delivery team about narrow streets, low-clearance bridges, or HOA restrictions so we can coordinate and avoid unexpected fees or delays.

Contractor pricing varies, but expect labor and equipment charges generally in the ballpark of $10 to $40 per cubic yard for spreading and compaction for routine grading jobs, or hourly equipment rates of about $75 to $150 per hour depending on crew and machine. For accurate budgeting, get written quotes from local contractors that itemize spreading, grading, compaction, and disposal of any unsuitable material.

In East Wenatchee's semi-arid climate, well-graded fill-dirt can perform fine for raising grades and building terraces, but fine-grained fill can retain moisture and is not ideal as a planting medium for orchards. For orchard rows, use well-draining soil mixes or add a sandy top layer and design irrigation and surface drainage to avoid water pooling; consult local ag extension or an orchard contractor for soil recommendations tailored to fruit trees.