Gravel delivery in Fannin, TX

Prices vary by material and supplier, but expect approximate ranges for West Texas: crushed limestone $20-$40 per ton (about $15-$30 per cubic yard), pea gravel $30-$60 per ton ($22-$45 per cubic yard), and river rock $50-$100+ per ton ($38-$75+ per cubic yard). Final price depends on local supply, haul distance to Fannin, and any delivery fees; Hello Gravel provides exact quotes for your zip code. Remember our minimum order is 3 tons, and prices can change seasonally.

In the Fannin area you will most commonly see crushed limestone, caliche-based gravels, pea gravel, and some river rock. Crushed limestone is a go-to for driveways and bases because it compacts well, pea gravel is popular for patios and walkways for its smooth finish, and larger river rock is used for drainage and decorative beds. Local geology means color and texture will vary, so ask for photos or samples if color matters.

For rural driveways we recommend a compacted gravel thickness of 3u0022 for a light-use surface, 4u0022 for standard residential driveways, and 6u0022 for heavy use or poor subgrade. Using a common example 50 ft long: a 1-car (10 ft wide) driveway needs roughly 6 tons (3u0022), 8 tons (4u0022), or 12 tons (6u0022); a 2-car (20 ft) needs about 12, 16, or 24 tons; a 3-car (30 ft) needs about 18, 24, or 36 tons. Always round up, add 10% for settlement and compaction, and check our material calculator for exact figures for your driveway size.

West Texas heat increases dust and can cause finer gravels to loosen, while occasional heavy rains can wash out or rut poorly drained surfaces. Choose angular, crushed stone for driveways (better interlock and compaction) and larger sizes or a drainage layer where runoff is likely. Good slope, crowning, and drainage features like ditches or French drains reduce maintenance; expect to regrade high-traffic areas every 1-3 years depending on weather and use.

Most local suppliers and haulers that serve Fannin offer bulk delivery by dump truck and can deliver to rural driveways; spreading is sometimes available but typically performed at the driver's discretion and may carry an extra fee. Hello Gravel coordinates delivery with local contractors and will show you delivery options and any spreading requests at checkout. Be sure to confirm access, overhead clearance, and where the driver can safely dump before delivery.

Typical maintenance includes regrading to restore crown and smooth ruts every 1-3 years, topping up 1-2 inches of new gravel every 2-5 years, and spot-filling after heavy rains or washouts. More frequent maintenance is needed on steep sections, high-traffic areas, or where fines have been lost to wind or runoff. Regularly remove vegetation and keep drainage channels clear to extend the life of the surface.

Gravel is the lowest upfront cost and easiest to install for rural Fannin properties, but it needs routine maintenance and topping. Asphalt has higher initial cost, lasts longer with periodic sealing, and requires less frequent grading; concrete costs more up front, lasts the longest, and needs the least routine maintenance but can crack in poor subgrades. For remote or long driveways gravel is often the most practical; choose asphalt or concrete for higher traffic and lower maintenance needs if budget and site access allow.

For patios and walkways choose pea gravel or small crushed stone (3/8u0022 to 3/4u0022) over a compacted base and edge restraint for stability. For erosion control on slopes, use larger crushed stone, riprap, or 1-2u0022 angular rock and pair with geotextile fabric to prevent washout; caliche can act as a hard base but may need to be broken up or supplemented with angular base material for drainage. If caliche is present, consult a local supplier or contractor—it affects compaction and drainage and may change material selection.

Calculate area in square feet, choose depth in inches, then use cubic yards = area * depth(inches) / 324. Convert cubic yards to tons by multiplying by about 1.25 to 1.4 (use 1.3 as a general rule for common gravels). Hello Gravel's material calculator and ordering flow will do this math for you and include minimum order (3 tons) and recommended overage for settling.

Contractors usually ask about site access for dump trucks, existing subgrade condition, presence of caliche or clay, desired thickness and compaction specs, drainage plans, and whether edging or geotextile fabric is required. They will also check haul distance, spread vs. dump-only delivery, utility locates, permit needs, and the expected timeline. Providing photos, measurements, and desired material type speeds up accurate bids.

Drivers may be able to perform tailgate spreading at their discretion, and you can request this service at checkout; however, it is not guaranteed and depends on truck type, site access, and safety. If spreading is essential, note it in order notes and be prepared that a contractor or additional labor may be needed. Hello Gravel will pass your request to the hauler and include any applicable fees in your quote.

Because Hello Gravel sources materials from local suppliers, color, size, and texture will reflect regional geology and may not match photos exactly. We encourage customers to request photos or samples when color or texture is important, and to note preferences in Order Notes at checkout. If something looks materially different than expected, contact our customer service and we will help address the issue per our policies.

Standard delivery lead time is usually 2+ business days, with next-day delivery available for orders placed before noon CST for an extra fee. Hello Gravel's minimum order is 3 tons; final availability and scheduling depend on local supplier capacity and access to your property. Enter your zip code on our site or contact our team to get an exact delivery window and price for Fannin.