Fill Dirt delivery in Dallas, WI

Fill-dirt pricing in the West Wisconsin area varies by source, but most customers see delivered prices in the range of about $15 to $40 per ton depending on moisture, composition, and distance. Hello Gravel has a 3-ton minimum order and standard delivery is usually 2+ business days; next-day delivery may be available for an extra fee when ordered before noon CST. Exact pricing for Dallas, WI will be shown at checkout after we match you with local suppliers and hauling options.

Local haul fleets that serve Dallas commonly use tri-axle dump trucks that carry roughly 10 to 14 tons per load, while larger end-dump trucks can carry up to 20 to 25 tons where roads allow. Hello Gravel requires a minimum order of 3 tons; if you need less than a truckload we can often arrange partial loads or recommend sites that accept small deliveries. Ask about delivery access at checkout because truck size can affect where material can be dumped on your property.

Convert area and depth into cubic yards: area (sq ft) x depth (ft) / 27 = cubic yards. For a quick ton estimate, multiply cubic yards by 1.2 to 1.4 (fill-dirt density varies with moisture and composition); for example, raising 1,000 sq ft by 2 inches needs about 6.2 cu yd or roughly 7.5 to 8.5 tons. We also recommend ordering 10 to 20 percent extra to allow for settling and compaction.

Fill-dirt is fine for backfill and creating rough grades, but it is not a long-term surface for driveways or garage pads in West Wisconsin's freeze-thaw conditions unless it is engineered and compacted properly. For driveways and garage pads, contractors usually place a compacted granular base such as crushed stone or crushed limestone over or under engineered fill to reduce frost heave and improve load-bearing. For final lawn or garden areas, topsoil or a top layer of planting soil is recommended over compacted fill-dirt.

Properly compacted fill-dirt with good drainage performs reasonably well through winter, but poorly compacted or wet fill can settle, heave, or erode with repeated freeze-thaw cycles. To reduce issues, grade the site so water drains away, install a granular base where vehicles will travel, and avoid placing uncompacted fill near foundations or low-lying wet areas. If you plan to plow, avoid loose, unconsolidated fill at edges where pushback can scatter material.

Contractors in the area commonly bundle delivery with spreading, rough grading, and mechanical compaction (using plate compactors or rollers), and some offer finish grading and seeding. Pricing varies: small jobs are often billed hourly ($75 to $150 per hour) or by the cubic yard ($5 to $15 per cu yd) depending on equipment needed and access; large jobs may be quoted as a flat price. Ask contractors for itemized quotes and check whether tailgate spreading is requested at checkout; drivers may provide limited spreading at their discretion.

Possibly. Local town, township, or county rules may require permits for placing large volumes of fill, work near wetlands, or modifications in regulated floodplain areas, and some HOAs have rules about visible grading or driveways. Before starting, contact your city or township zoning/building office and the county land conservation or planning department to confirm permit needs, and check HOA covenants if you have one. If your project affects drainage or neighboring properties, get approvals and a contractor who documents grades and erosion control.

Expect some settlement during the first year as the material consolidates—common settlement is 5 to 15 percent of initial placed volume, and sometimes more if the fill was placed in thick lifts without proper compaction. To reduce or avoid rework, place fill in 6- to 12-inch lifts and compact each lift, and order 10 to 20 percent extra material to top off after settlement. If installed and graded correctly with good drainage, properly compacted fill rarely needs replenishment beyond minor touch-ups for erosion or lawn establishment.

For driveways: crushed limestone or crushed stone is the better base because it drains and compacts well; fill-dirt alone is not recommended as a final wearing surface. For grading and raising yard elevations: fill-dirt is cost-effective bulk fill for building grade, but finish the surface with topsoil for planting or a granular base for paved areas. For backfill near foundations: use engineered fill and granular materials where specified by an engineer; avoid placing organic-rich topsoil directly against foundations where settling and moisture can cause issues.

The most convenient time is late spring through early fall when ground is dry and compaction equipment works well; contractors can achieve better compaction and grading in drier conditions. Winter deliveries are possible on frozen ground but access and local rules may limit work, while spring thaw can create very wet, soft conditions that make compaction difficult and increase risk of rutting and settlement. Plan ahead with Hello Gravel to reserve dates and discuss seasonal constraints for your specific Dallas address.