Fill Dirt in Edgewood, WA

Delivered fill-dirt prices in Edgewood typically vary by supplier and yard access, commonly ranging from about $12 to $30 per ton delivered; tight driveways or long haul distances can push the price higher. Hello Gravel has a 3-ton minimum order, and some local suppliers or truckers may set higher minimums or flat delivery fees, so get a zip-code quote for an exact price.

Standard Hello Gravel delivery generally requires at least 2 business days to schedule, with a next-day option available for orders placed before noon CST for an extra fee. The platform minimum is 3 tons, but individual suppliers or contractors in the Edgewood area may set larger minimums for larger trucks or remote sites, so confirm timing and minimums when you request a quote.

Fill-dirt density depends on moisture and composition, but a practical planning range for Edgewood projects is about 1.2 to 1.4 tons per cubic yard; many pros use 1.3 tons/yd3 as a working estimate. Always order 5% to 10% extra to allow for compaction and settlement, and check with your supplier if your material looks heavier (wet or clay-rich).

Fill-dirt is best for bulk raising grade, non-planting structural fill, and backfill, but it is not ideal where drainage or plant growth matters. For Edgewood's wet climate, avoid clay-heavy fill near finished grades—use topsoil for planting areas and well-graded crushed rock or class 2 road base for driveways and heavy-traffic subbases to improve drainage and stability. When in doubt, ask a local contractor or engineer for a recommended material and drainage plan.

Residential projects typically require placing fill in 6- to 12-inch lifts and mechanically compacting each lift to a specified density (commonly 90% to 95% of standard Proctor) for structural or near-structure work. Small plate compactors rent for roughly $100 to $200 per day, whereas small rollers or vibrating rollers run several hundred dollars a day; hiring a contractor to compact and test the site can cost more but is often the safest option for foundation or driveway subgrade work.

Permitting depends on the scope and location of the work; significant grading, land disturbance, septic work, or imports of large volumes often require permits from the City of Edgewood (or Pierce/King County if your property falls in county jurisdiction). Check with Edgewood Building and Planning or the applicable county permitting office before starting major fills, and inform your Hello Gravel rep so we can coordinate deliveries around permit windows and site access.

Properly placed and mechanically compacted fill typically exhibits low long-term settlement (often under a few percent), while loose or uncompacted fill can settle substantially over months to years. Edgewood's wet winters can slow consolidation and cause additional settlement if fill is placed while saturated, so compact in lifts and allow time for consolidation or overbuild where needed.

Contractors in the Edgewood area commonly use fill-dirt for raising grades, backfilling trenches, forming building pads (when properly engineered), and creating berms or subgrade fill under non-landscaped areas. They generally avoid using fill-dirt as final topsoil for planting, for driveway wearing surfaces, or where drainage is critical—there they prefer topsoil, crushed rock, or class 2 base material instead.