Fill Dirt delivery in Buckley, WA

Delivered fill-dirt prices in the Buckley/West Washington area commonly range from about $12 to $35 per ton, depending on the material quality, how far the supplier is from your site, and seasonal demand. Hello Gravel has a 3-ton minimum order; delivery fees, truck minimums, and any extra handling (steep driveways, long walk-ups) can add to the total. For an exact price for your address and schedule, check your zip code on our site or request a quote.

Use this simple rule: one inch of fill over one square foot equals about 0.004 tons of fill-dirt. That means to raise 100 square feet by 3 inches you need roughly 1.2 tons, and to raise 1,000 square feet by 6 inches you need about 24 tons. For project estimates, always add 5-10% extra for compaction and settling and confirm with Hello Gravel’s material calculator.

Hello Gravel connects you with vetted local suppliers and haulers that serve Buckley and the surrounding West Washington area (Pierce County). Our platform minimum is 3 tons, but some suppliers or specific truckloads may have higher minimums (commonly 5–10 cubic yards or a full truckload). Enter your zip code on Hello Gravel to see available local suppliers, their minimums, and delivery options for your address.

Buckley’s wet maritime climate and occasional freeze-thaw cycles mean plain loose fill-dirt with lots of fines or clay can hold moisture, settle, and shift over time. For areas that need good drainage or near foundations, contractors often use engineered or granular fill and proper drainage systems to avoid waterlogging and frost heave. Proper placement and compaction, and avoiding deliveries when the site is saturated, will improve long-term performance.

Permit and testing requirements vary by project—check the City of Buckley and Pierce County building departments for specifics before you start. Foundations, retaining walls, and structural fills commonly require engineered plans and compaction testing, while simple driveway topping may need a permit if it alters drainage or the public right-of-way. When in doubt, ask your project engineer or the local building office; Hello Gravel can help you get the right material but cannot approve permits.

Typical cost components include the material price per ton, the delivery/truck fee (distance and site access affect this), optional labor for spreading, compaction equipment or contractor charges, and any site prep or permit costs. As a ballpark in Buckley, expect material at roughly $12–$35 per ton, delivery/truck charges commonly $150–$400 depending on distance and access, and spreading/compaction labor or rental costs from about $50–$300. Exact totals depend on access, quantities, local supplier rates, and whether you need engineered fill or inspections.