Fill Dirt delivery in Vienna, VA

Material-only prices for fill-dirt in the Vienna area commonly run in the range of about $8 to $25 per ton depending on source and quality, with contractors often getting lower per-ton rates on large orders. Delivery and trucking can add to that cost (see delivery FAQ below), and Hello Gravel shows all fees up front—check your zip code for exact local pricing and any available bulk discounts.

Raise 1,000 sq ft by 3 inches equals about 250 cubic feet or 9.26 cubic yards. Fill-dirt typically weighs about 1.2 to 1.35 tons per cubic yard, so plan on roughly 11 to 13 tons; always round up for settlement and job losses and keep Hello Gravel's 3-ton minimum in mind.

For Northern Virginia's clay-prone soils, use fill-dirt primarily to raise and level grades, but pair it with a granular layer: a compacted crushed-stone (base) under the surface or mixing a portion of sand/gravel into the upper fill improves drainage and load-bearing. Many pros build a compacted fill-dirt subgrade then finish with 4-6 inches of crushed stone or open-graded material to shed water and prevent rutting.

Fill-dirt can compact well when placed in lifts and mechanically compacted, but pure fill-dirt does not drain as effectively as crushed stone, especially on Vienna's finer, clayey soils. For sites prone to pooling or heavy rain, add a drained gravel layer or install sub-surface drainage because fill-dirt alone can retain water and settle unevenly.

A properly built fill-dirt subgrade with a gravel driving surface can perform for many years, but expect initial settlement in the first 6-12 months and plan to regrade low spots. Routine maintenance usually includes seasonal regrading and adding a fresh top layer of gravel every 2-5 years depending on traffic, drainage, and winter conditions.

Geotextile fabric is helpful when you have weak or wet native soils because it separates materials and reduces mixing of fines into the base, but it works best under crushed-stone layers rather than directly under large depths of fill-dirt. If you suspect poor subgrade or heavy loads, request fabric at the design stage and discuss placement with your installer.

Fill-dirt is an economical way to raise grades and backfill; it compacts well but may contain fines and hold water. Crushed stone offers better drainage and structural support for driveways and foundations but costs more per yard. Topsoil is for planting and surface grading only; it should not be used where structural support or drainage is needed.

Delivery costs vary by distance, load size, and site access—many local deliveries add roughly $5 to $15 per ton or a flat delivery fee per truckload, while a local pickup avoids trucking fees but requires a suitable vehicle and labor. Hello Gravel displays delivery charges up front for your zip code and can show next-day or scheduled options; compare the total delivered price to the inconvenience and cost of renting a truck and hauling yourself.