Fill Dirt delivery in Keysville, VA

Fill-dirt is clean, low-organic soil used to raise grade, fill depressions, or build up subgrades — it is not topsoil and has minimal organic matter. In Keysville, use fill-dirt for leveling yards, preparing a base for patios or foundations, or filling low spots before landscaping; avoid using it where you need good planting soil or finished surface material.

Volume = area x depth: 1,000 sq ft x 0.5 ft = 500 cubic feet, which is about 18.5 cubic yards. Fill-dirt typically weighs about 1.1 to 1.3 tons per cubic yard, so plan on roughly 20 to 24 tons, and order an extra 10% for settlement and compaction.

Delivered prices vary by supplier, source, and distance, but in the Keysville area a common range is about $15 to $35 per ton (roughly $18 to $42 per cubic yard using 1.2 tons/yd3). Final price depends on local availability, hauling distance, site access, and whether spreading or permits are required, so get a quote for your zip code to be sure.

Hello Gravel connects you to local suppliers and haulers that serve Keysville and Charlotte County; our platform minimum is 3 tons, though individual suppliers may set their own minimums (often 1 to 5 cubic yards for small jobs or higher for commercial loads). Use our site to check availability for your zip code and request a supplier quote to see exact minimums and delivery options.

Yes — Keysville and Charlotte County can experience seasonal freeze/thaw and areas with clay-rich subsoils, both of which influence settling and drainage. Use low-organic, well-graded fill and compact in layers; if drainage is a concern, blend in sand or gravel or install drainage features to reduce frost heave and slow settling.

Small fills for landscaping typically do not need permits, but significant grading, altering drainage, or changing lot lines often requires permits or approvals from Charlotte County planning or land development. Check with Charlotte County Building and Zoning before bringing in large volumes — it is the safest way to avoid fines or forced remediation.

For compaction and stability, choose a well-graded, low-organic fill-dirt with a mix of sand and fines that compacts easily; for improved drainage and driveways, use a mix that includes crushed stone or road base rather than pure fill-dirt. For driveway base, consider compacted fill-dirt as a subgrade topped with 3/4u0022 crushed stone or road base to handle traffic and shed water.

If used as a compacted subgrade beneath a proper stone or asphalt surface, fill-dirt can last decades with little maintenance; if used as an exposed surface, it may need touch-ups every 1 to 5 years depending on traffic, erosion, and drainage. Good compaction, edge protection, and surface material reduce the need for frequent replenishing.

Use fill-dirt to raise grade and create a stable subgrade, but prefer crushed stone or road base for driveway surfaces because they drain and lock together under traffic. Use topsoil only for planting and finished landscaping because it contains organics and compacts poorly compared with engineered fill-dirt or aggregated base materials.

Deliveries are typically made by tri-axle dump trucks which are about 8.5 ft wide and need roughly 10 to 12 ft of clear access and room to turn or back up; overhead clearance of about 14 ft is usually required. Delivery fees may apply for long hauls, tight access, or small loads; schedule your delivery date at checkout and add access notes so the hauler can plan the safest drop location.

Most suppliers deliver loose fill-dirt; compacting is normally done on site. For small projects you can compact in 4 to 8-inch lifts with a plate compactor; larger areas or higher compaction requirements need a vibratory roller and professional compaction to reach recommended density levels.