Gravel delivery in Gloucester, VA

Delivered prices in Gloucester vary by type and supplier, but typical ranges are: crusher run $25-$45 per ton, #57/crushed stone $30-$55 per ton, and pea gravel $35-$65 per ton. One cubic yard of gravel in this area is roughly 1.3 tons, so multiply cubic yards by that factor for a quick per-yard estimate. Prices change with season, exact product spec, and delivery distance—check your zip code on Hello Gravel for a live quote and note our 3-ton minimum.

For Gloucester’s coastal conditions choose angular crushed stone (like #57) or crusher run for a stable, well-draining base; both shed water better than rounded material. Pea gravel drains well for decorative areas but can shift under heavy flow or flooding, so reserve it for low-slope or ornamental uses. In flood-prone spots, raise finished surface and combine with geotextile and good sub-base to reduce washouts.

Use this quick rule: cubic yards = (area in sq ft x depth in inches) / 324, then multiply cubic yards by about 1.3 to get tons. Example: a 12'x30' single-car driveway (360 sq ft) at 4u0022 needs roughly 4.4 cubic yards or ~6 tons; a 20'x40' double driveway (800 sq ft) at 4u0022 needs about 9.9 cubic yards or ~13–14 tons. Contractors often recommend 6u0022 or more of compacted base on clay soils in Gloucester, which increases material needs accordingly.

Hello Gravel’s standard minimum order is 3 tons and standard delivery is 2+ business days, with a next-day option for orders placed before noon CST for an extra fee. Same-day delivery is uncommon but sometimes possible with very local suppliers or dedicated haulers; availability depends on schedule and truck routing. For large bulk needs, full-truck loads are often available and can lower per-ton cost—check the checkout calendar or contact our team for zip-code-specific options.

On clay soils in Gloucester contractors typically build a firm sub-base of 4–6 inches of compacted crusher run and then add a 2–3 inch wearing layer of #57 or similar for a total compacted depth of 6–8 inches for driveways. Installing geotextile fabric under the aggregate helps prevent mixing with clay and reduces settling. Proper compaction with a plate compactor or roller after each lift is essential to minimize rutting and washouts.

Gravel has a lower upfront cost but generally higher ongoing maintenance—expect periodic regrading and topping off every 1–5 years depending on traffic and drainage. Asphalt and concrete have higher initial costs but less frequent surface maintenance; asphalt may need resurfacing in 10–20 years and concrete can last 25+ years with proper installation. Long-term cost depends on use, drainage, and how well the base was prepared—get local contractor estimates for apples-to-apples comparisons.

You may need permits or approvals, especially for new curb cuts onto public roads or work in county right-of-way. Gloucester County zoning, the county public works office, or VDOT (for state roads) can confirm requirements and any inspection or setback rules. Check with local authorities before ordering materials so you avoid costly rework.

Common solutions in Gloucester include geotextile fabric under the base, gravel grid/cellular confinement systems, and sturdy edge restraints to keep material in place. Grids or cellular systems distribute loads and reduce movement, which is helpful on clay subsoils and slopes. Polymer binders or resin products are used in some decorative applications but require proper installation and local testing for durability in coastal climates.

Saltwater exposure doesn’t usually damage stone itself, but salt spray and coastal humidity can affect metal fixtures and accelerate plant stress near driveways. Avoid calcareous or shell-based aggregates near tidal areas because they can break down faster; angular, siliceous crushed stone performs better for drainage and longevity. Expect more frequent maintenance in salt-exposed locations and design drainage to move water away from the surface.

Labor and equipment costs vary with site access, grading needs, and drainage work—small, straightforward installs might run a few hundred to a couple thousand dollars in contractor time, while full rebuilds with grading, drainage, and compaction can be several thousand dollars. As a rough example, installing a properly prepared 800 sq ft gravel driveway can cost anywhere from about $1,500 to $6,000 for site prep and installation, not including material. Always get multiple local quotes and ask suppliers on Hello Gravel for delivered material pricing to include in bids.