Fill Dirt delivery in Glen Allen, VA

Fill dirt is clean, compactable soil used to raise grades, backfill foundations, and build up low spots. In Glen Allen you’ll use it to level yards, fill utility trenches, or create proper slopes away from foundations; it is not intended as a finished surface for driveways or landscaping without a top layer of topsoil or stone. Because local soils can be clayey and hold water, plan for compaction and proper drainage when using fill dirt here.

Per ton or per cubic yard, fill dirt is usually less expensive than crushed gravel. However, fill dirt does not provide a stable, draining surface for a driveway—contractors in Glen Allen typically use structural fill and then a crushed-stone base, so the cheapest material may not be the best long-term choice.

You can place gravel over fill dirt, but only if the fill dirt is well compacted, free of organic topsoil, and graded for drainage. In Glen Allen’s clay-prone areas, failing to remove topsoil or compact in lifts often leads to uneven settling and poor drainage, so excavation and proper compaction are usually recommended before adding a gravel surface.

Local prices vary with supplier, load size, and distance, but expect a typical delivered range of about $12–$45 per cubic yard (roughly $15–$55 per ton) for basic fill dirt in the Glen Allen area. Final price depends on availability, moisture content, and minimum-order requirements; Hello Gravel has a 3-ton minimum and will show delivery options and exact pricing when you enter your zip code.

One cubic yard equals 27 cubic feet and covers about 324 sq ft at 1 inch depth. For a 1,000 sq ft area: 2 inches of fill dirt needs about 6.2 cubic yards, 3 inches needs about 9.3 cubic yards, and 6 inches needs about 18.5 cubic yards. One cubic yard typically weighs about 1.1–1.4 tons depending on moisture and soil type, so convert to tons for delivery quotes.

Two inches of fill dirt is not adequate for a driveway base—driveway subgrades generally require several inches of structural fill plus stone. For minor yard leveling before sod, 2 inches may be acceptable in small spots, but for larger grade adjustments you should plan on more material and proper compaction; also use topsoil on the final few inches where you will grow grass.

Compaction on delivery is not a standard guaranteed service; Hello Gravel drivers may be able to tailgate spread at their discretion but typically will not perform mechanical compaction. Proper compaction is best done in lifts of 4–6 inches with a plate compactor or roller after delivery, which is something your contractor or equipment rental can handle.

Fill dirt can be used to raise and level grades, but it is not ideal as the final planting layer because it may be dense and low in organic matter. In Glen Allen, where clay can impede drainage, use fill dirt for bulk grade work and finish with 3–4 inches of topsoil or amended soil for sod or planting; always compact in lifts and slope the yard away from structures to ensure proper drainage.

Fill dirt tends to settle over time, may contain clay that holds water, and lacks the drainage and structural strength of crushed stone. Using fill dirt as a surface layer can lead to rutting, pooling, and poor grass growth in Glen Allen’s climate; it’s best used as a structural layer beneath engineered base materials or topsoil depending on the project.

No, fill dirt does not harden like stabilized gravel or polymer-bound aggregates; those products are designed for surface stabilization of gravel. If you need a firm, low-maintenance surface in Glen Allen, use a structural base of crushed stone with an appropriate surface product or consult local suppliers about stabilized gravel options for the top layer.

For the fill dirt portion only, a rough example: a 20 ft by 100 ft driveway with a 6-inch fill layer needs about 37 cubic yards. At $12–$45 per cubic yard delivered, material and delivery could run roughly $440–$1,665, plus compaction rental or contractor time (often $200–$800). Prices vary, so get a local quote on Hello Gravel for an exact number and remember you’ll also need crushed stone and surface materials for a proper driveway.

Measure the area and desired depth in inches, then use Hello Gravel’s material calculator to get a yardage estimate and enter your zip code to see local pricing and availability. Note site access, driveway width for the truck, any gated or low-clearance restrictions in Order Notes, request tailgate spreading if desired (driver discretion), and contact customer service early for changes or questions.