Fill Dirt in Wichita County, TX

Typical delivered prices for fill-dirt in Wichita County range about $10 to $20 per ton, or roughly $12 to $24 per cubic yard using a common conversion (1 yd3 ≈ 1.2 tons). Prices vary with supplier, moisture content, truck distance, and whether material is screened or contains clay, so get a quote for your zip code. Hello Gravel minimum order is 3 tons and delivery pricing may include a fee for short runs or smaller loads.

Hello Gravel requires a 3-ton minimum order; many orders qualify for free delivery, but some routes carry a delivery fee (commonly $50 to $150) depending on distance and local supplier. Standard delivery requires 2 or more business days; next-day delivery is often available for orders placed before noon CST for an extra fee. Tailgate spreading can be requested at checkout but is done at the driver’s discretion and is not guaranteed.

For raising grade and general fill, use clean subsoil fill without organic material or topsoil; avoid highly organic or soft topsoil. For driveway bases and building pads, a compactable granular fill or select fill with low organic content is best, often followed by 6-8 inches of crushed stone for the driving surface. For septic trenches and backfill, use approved clean fill or sand as required by the local health department rather than loose topsoil; check local septic rules before ordering.

Wichita County and the broader North Texas region commonly have clayey subsoils that expand when wet and shrink when dry, which can increase settlement and movement in un-compacted fill. Poor drainage or placing fill without proper compaction can magnify problems after heavy rains or in low spots. To reduce risk, use well-graded, clean fill, compact in lifts, and design good surface and sub-surface drainage.

A common guideline is to place fill in 6- to 8-inch loose lifts and compact each lift to a target of about 90% to 95% of Standard Proctor density for structural work. Driveway base build-ups often call for 6–8 inches of compacted fill plus a 3–4 inch compacted aggregate surface; building pads may require 8–12 inches or more of compacted select fill depending on soil reports and load. Always follow local code or an engineer’s recommendation for foundations and larger structures.

Calculate area (square feet) multiplied by desired depth (feet) to get cubic feet, then divide by 27 to convert to cubic yards. Multiply cubic yards by an estimated density (we commonly use 1.2 tons per cubic yard for fill-dirt in this region) to get tons needed. Example: 1,000 sq ft at 6 inches (0.5 ft) = 500 cu ft = 18.5 yd3 × 1.2 ≈ 22.2 tons; always round up to account for compaction and waste.

Costs vary by job size, access, and contractor. As a rough guide, homeowner labor and small-equipment placement (raking, small plate compactor) can run $10 to $20 per cubic yard if you hire local help, while professional contractors who bring machinery and rollers may charge $0.50 to $2.00 per square foot or $3 to $10 per ton depending on complexity. Equipment rental for a plate compactor or small roller is widely available locally (expect daily rental costs plus fuel), and Hello Gravel can help connect you with suppliers and haulers.

In hot, dry summers fill-dirt over expansive clay can shrink and develop surface cracks; during heavy rains it can erode or settle if not compacted and protected. Good practice is to compact properly at installation, maintain surface drainage, add erosion control on slopes, and check/repair low spots after the first wet season. Periodic top-up and regrading may be needed every few years in areas with poor drainage.

Small yard grading and minor fills may not require a permit, but building pads for structures, driveways that change drainage, and septic installations often do require county or city permits and may require engineered fill or a compaction report. Wichita County and cities like Wichita Falls have specific building and health department rules for foundations and septic systems, so check with the local building department or a geotechnical engineer before placing large fills. For septic work, follow the county health department’s backfill specifications to avoid system problems or failed inspections.

Use fill-dirt to raise grade and create a stable subgrade, but finish driveways with crushed limestone or crushed rock for load-bearing and drainage—the limestone provides a locked, stable surface. River rock is attractive for drainage swales and decorative beds but is a poor base for driveways because stones roll and shift under traffic. For erosion control on slopes, pair compacted fill with erosion-control fabric, vegetation, or properly sized rock armoring rather than loose fill alone.

Hello Gravel connects you with local suppliers and contracted dump truck haulers in the Wichita County area for bulk delivery; check our site with your zip code to see available material types and pricing. For rental compaction equipment, national chains (such as Home Depot tool rental, Sunbelt Rentals, United Rentals) and local rental yards around Wichita Falls commonly stock plate compactors and small rollers. If you need recommendations for suppliers or help estimating delivery or equipment needs, contact Hello Gravel customer support or request a quote through our site.