Gravel delivery in Teague, TX

Prices vary by material and supplier, but in West Texas near Teague a delivered ton of common gravel typically ranges from about $40 to $80 per ton. Final price depends on the type (pea, crushed, river rock), delivery distance, and whether you choose next-day delivery or additional services.

Usually you do not put plain sand directly under loose gravel for driveways or drainage because it can shift and cause rutting. For paver installations, use a compacted gravel base (crushed stone) first, then a thin bedding layer of coarse sand for leveling; in Teague's clay-prone soils a well-compacted base is especially important.

Pea gravel is small, rounded stones about 1/8u0022 to 3/8u0022 in size and is popular for walkways and play areas. River rock is larger, smooth stones that vary more in size and color; use river rock for decorative beds and drainage features where bigger stones are desired.

Sand and gravel are used for driveways, drainage, paver bases, concrete mixes, and decorative beds. In Teague you’ll commonly see gravel used for low-maintenance driveways, french drains, and xeriscape landscaping suited to the local dry climate.

A typical tri-axle dump truck used by our suppliers carries roughly 14 to 16 cubic yards, which is approximately 20 to 25 tons depending on the material. If you need that volume, order as a truckload and check delivery options; remember our minimum order is 3 tons and standard delivery takes 2+ business days.

For a 100 ft long driveway that is 12 ft wide and 4 inches deep, you will need about 20 to 22 tons of gravel. Adjust up for a thicker base, wider driveway, or material that compacts more; our material calculator can give an exact estimate for your measurements.

You can, but it is not ideal—gravel on untreated dirt tends to migrate, rut, and allow weeds. For best results in Teague’s soils, remove topsoil, install a compacted crushed-stone base and landscape fabric if desired, then add your gravel layer.

Cost depends on width, depth, and material. As an example, a 20 ft long by 12 ft wide driveway at 4 inches depth needs about 4 tons of gravel; at $40 to $80 per ton that material would cost roughly $160 to $320 plus delivery and any base preparation.

The term '70/30 rule' usually refers to soil-compost mixes (70% soil, 30% compost) rather than gravel. For gravel applications you’ll more often see recommendations for a compacted base (for example, 70% larger stone and 30% fines in some road-base mixes), so check the specific product name like 'crusher run' or 'road base' for exact ratios.

Buying in bulk (truckload) from a local supplier and scheduling standard delivery is usually the most cost-effective option. Compare material types because locally sourced crushed limestone or caliche can be cheaper than decorative river rock, and check our site for transparent pricing and delivery options.

The 3-3-3 rule (commonly 3 inches deep, keep mulch 3 inches away from trunks, and refresh every 3 years) is a guideline for organic mulch, not gravel. For gravel beds you typically use a 2 to 3 inch depth for decorative areas and a thicker compacted base for driveways or paths.

Avoid pea gravel on steep slopes, ADA-accessible paths, or where it will be used by small children for play, since it can shift and be hard to walk on. For driveways or high-traffic areas in Teague consider crushed stone that locks together better under compaction.

Common names include 'crusher run', 'road base', or 'bank run' depending on composition; a concrete-type mix is usually called 'sand and gravel' or 'concrete mix'. Use these mixes for base layers, compaction, or when a blended material is required for stability or drainage.

Start with a compacted gravel base (crushed stone) for stability, then add a thin layer of coarse sand as a bedding layer for pavers. In Teague’s soils a well-compacted base is especially important to avoid settling and shifting over time.

Sand is often cheaper per ton than decorative gravels, but coverage differs because sand and gravel have different densities and use-cases. Compare prices per cubic yard and consider delivery, minimums, and project needs when choosing between sand and gravel.