Gravel delivery in Keller, TX

Delivered gravel prices in Keller usually fall in a range because material type and distance matter. Expect roughly $25–$50 per ton, which is about $35–$65 per cubic yard for common materials like crushed limestone or pea gravel. Final price depends on the aggregate type, truck access, and whether you need spreading or extra handling.

In Keller and the wider Fort Worth metro, crushed limestone (¾u0022 and ¾u0022 minus), decomposed granite, pea gravel, and river rock are the most common. Crushed limestone is the go-to for driveways and base layers because it compacts well; pea gravel and river rock are popular for decorative beds and drainage features. Regional geology means you may see variations in color and texture from local suppliers.

Keller's clayey soils and hot, dry summers can reduce drainage and cause settling; clay holds water and becomes sticky when wet, which can make gravel migrate or rut. Good base preparation, including a compacted sub-base and proper grading, helps prevent potholes and washouts. Expect to regrade or add top dressing more often after heavy rains in spring and during wet seasons.

Hello Gravel connects you with vetted local suppliers and hauling fleets serving Keller and the Fort Worth metro so you get regional materials and scheduled delivery. Typical delivery is by tri-axle dump truck with a minimum order of 3 tons; standard delivery takes 2+ business days and next-day delivery is possible if ordered before noon CST for an extra fee. Drivers may offer tailgate spreading at their discretion if you request it at checkout.

Use this quick rule: cubic yards = (length ft × width ft × depth in) / 324, then multiply cubic yards by 1.3 to estimate tons. As an example, a 1-car driveway (12'×20') at 3u0022 needs about 2.2 cu yd or roughly 3 tons, while a 2-car driveway (20'×20') at 3u0022 needs about 3.7 cu yd or roughly 5 tons. For a structural base layer (4u0022+ compacted), plan on 1.5–2× the top layer amount depending on finish and traffic.

City of Keller and HOA rules vary, so check your HOA covenants and contact the City of Keller planning/permits before installing. Common restrictions include requirements for driveway approaches, runoff control, visible front-yard surfacing, and allowed materials or colors. If you have an HOA, get approval in writing to avoid fines or required rework.

Installed gravel driveways in Keller typically run from about $1,000 to $5,000 for most 1- to 2-car driveways depending on how much grading, base rock, compaction, and edging are required. Many contractors quote $8–$20 per square foot for a full installed system that includes excavation, geotextile fabric, compacted base, and finished surfacing. Prices vary with slope, access, drainage work, and local contractor rates.

Gravel is the lowest-cost up-front option and is flexible for rural or irregular lots, but it requires periodic topping, regrading, and can track more than asphalt or pavers. Asphalt offers a smoother, longer-lasting surface with higher upfront cost and more permanent drainage requirements; pavers cost the most but provide best curb appeal and longevity. In Keller's hot summers and occasional heavy rains, consider drainage, maintenance, and neighborhood rules when choosing between them.

In Keller's North Texas climate, expect to regrade or add fresh top gravel every 1–5 years for high-traffic driveways, and every 3–7 years for lower-traffic areas, depending on rain, traffic, and initial installation quality. A well-built base can last 10–20 years before major rebuilding is needed, but surface upkeep is ongoing. Regular maintenance like redistributing loose material and topping thin spots extends life.

For sloped lots in Keller, use angular crushed rock (¾u0022 or 1–2u0022 rock) and consider a compacted base with geotextile fabric to lock material in place and improve drainage. Combine the gravel with swales, grade adjustments, retaining walls, or terraces to slow runoff and direct water away from structures. Larger rock or riprap may be needed at concentrated flow points to prevent washouts.

Calculate cubic yards with (length ft × width ft × depth in) / 324, then multiply by about 1.3 to convert cubic yards to tons for common gravel. For example, a 12'×20' area at 3u0022 needs about 2.2 cubic yards or about 3 tons. Hello Gravel offers a material calculator and can connect you with local suppliers who will help confirm quantities based on local material density and compaction.

Yes, tell us about tight driveways, low-hanging wires, steep approaches, or narrow gates when you order so suppliers can match the right truck and driver. Tri-axle dump trucks are common and need clear access and sufficient turning radius; extra handling or smaller trucks add cost. Marking your intended drop area and contacting Hello Gravel with photos or notes helps avoid delays on delivery day.