Gravel delivery in Industry, TX

Typical delivered prices near Industry, TX vary by type and local quarry supply. As a ballpark, crushed limestone often runs about $20-$45 per ton, crushed rock is commonly $25-$50 per ton, and pea gravel usually ranges $30-$60 per ton; regional sourcing, seasonal demand, and delivery distance affect final price. Hello Gravel shows exact, upfront prices for your zip code and has a 3-ton minimum order.

For West Texas' hot, dry climate and local soils, a 3/4u0022 crushed limestone or 3/4u0022-1u0022 crushed rock with some fines is a common choice because the angular stone locks together and compacts well. Add a thicker base of larger crushed stone (4u0022-6u0022) under the surface layer for heavy loads and to improve drainage, and consider geotextile fabric over soft spots.

Use these quick coverage estimates: at 2u0022 depth one ton covers about 100 sq ft, at 3u0022 about 66 sq ft, and at 4u0022 about 50 sq ft. For example, a 12' x 100' driveway (1,200 sq ft) needs roughly 12 tons at 2u0022, 18 tons at 3u0022, or 24 tons at 4u0022; actual tonnage varies with rock density and local material, so double-check during checkout.

Yes. Hello Gravel partners with trusted local suppliers and haulers that source regionally for West Texas materials and can match you with vendors that deliver within about a 20-mile radius of Industry. Enter your zip code or contact our team to see exact supplier options and delivery pricing for your address.

Prepare by clearing vegetation, shaping a 4u0022-6u0022 compacted base of larger crushed stone, installing geotextile fabric over weak spots, and topping with 2u0022-3u0022 of surface gravel compacted and crowned for drainage. For maintenance, regrade and fill low spots yearly or after heavy rains, add a 1u0022-3u0022 top-up of new material every 1-5 years, and address erosion and drainage issues promptly to prevent washboarding and potholes.

Gravel has lower upfront cost, easier repairs, and better drainage for rural West Texas use, making it ideal for long driveways and farm roads where flexibility and quick access matter. Asphalt and concrete last longer with less frequent maintenance but cost more up front, require more preparation, and may need permits; choose based on budget, traffic loads, desired look, and long-term maintenance willingness.

Angular crushed stone with a modest amount of fines or a blended road mix will compact and lock together better than clean round pea gravel, helping reduce dust. For ongoing dust control, consider adding fines, using dust-suppressant treatments (calcium chloride, magnesium chloride, or polymer stabilizers), and keeping the surface well compacted and periodically watered if appropriate.

Installation costs vary with site prep, access, and required thickness; for a typical 12' x 100' driveway you might expect total installed costs roughly in the $1,500 to $6,000 range depending on how much base work is needed. Equipment rental and labor add up: a compactor or small skid steer is commonly $100-$600 per day, and contractors' labor rates vary regionally, so get a local estimate—Hello Gravel can help connect you with pros for quotes.