Fill Dirt delivery in Harlingen, TX

Typical delivered prices in the Harlingen/Brownsville area usually fall in a range rather than a single number because haul distance and screening matter. Expect roughly $12 to $25 per cubic yard, which works out to about $10 to $18 per ton for most fill dirt deliveries; screened or certified clean fill is often at the higher end. Final price depends on your zip code, minimum-order requirements (Hello Gravel minimum is 3 tons), truck type, and any spreading or next-day delivery fees — always get a local quote through Hello Gravel for an exact price.

Hello Gravel works with several local suppliers and haulers around Harlingen that commonly stock screened fill, clean fill, and construction-grade fill dirt; availability varies by day and quarry. The fastest way to see who has screened material in stock is to enter your zip code on Hello Gravel, request a quote, or call our team so we can check local inventory and delivery options. If you need a specific specification (no organics, no large clods), ask for 'screened fill' or request photos and material notes in Order Notes.

Harlingen's coastal plain and clay-rich soils tend to hold water and can swell or shrink with moisture, which makes plain fill dirt prone to settling and soft spots if not properly prepared. For areas with poor drainage or occasional standing water, use well‑compacted, low-organic fill and provide positive drainage away from structures; consider a free‑draining base (crushed stone) under driveways. If your site is in a flood-prone spot, raise finished grades above expected water levels and check local elevation and floodplain regulations before placing large fills.

Local requirements can vary, but for structural work (foundations, slabs, retaining walls) engineering specifications commonly call for 90% to 95% of Standard Proctor density or an engineer-approved equivalent and may require compaction testing. For driveways and patio bases, many inspectors accept 90% to 95% compaction for the base layer; for simple landscape fills, 85% to 90% may be sufficient. Always check with the City of Harlingen Building Department or your project engineer for site-specific requirements and obtain any required compaction test reports before sign-off.

For 1,000 sq ft: 2u0022 depth is about 6.17 cubic yards (roughly 6.8 to 8.3 tons), 4u0022 depth is about 12.35 cubic yards (about 13.6 to 16.7 tons), and 6u0022 depth is about 18.52 cubic yards (about 20.4 to 25.0 tons). These ton ranges use a typical fill dirt weight of about 2,200 to 2,700 lb per cubic yard; actual weight will vary with moisture and composition, so order a little extra (5% to 10%) to allow for compaction and uneven grades.

Fill dirt is fine for raising grades or filling low spots, but it is not a good finished driving surface because it compacts, rutts, and can become muddy under heavy traffic and wet conditions. Crushed limestone, caliche, or crushed stone are better choices for driveway bases and surfaces in South Texas because they drain better, lock together, and carry loads without excessive settlement. Best practice is to use properly compacted fill dirt to bring grades to level, then install a structural base of crushed stone or caliche and a finished surface appropriate for your traffic.

When used as a properly compacted base and covered with appropriate surfacing, fill dirt can last many years with minimal maintenance; uncovered or poorly compacted fill will erode, settle, and require frequent touch-ups. For driveways, the lifespan depends on the surface material: a crushed‑stone driveway on a compacted base can last 5 to 20+ years with periodic replenishing, while bare fill dirt surfaces commonly fail within a single wet season. Regular grading, repairing low spots, and maintaining drainage will extend the life of any fill installation.

Yes, many local contractors and independent operators offer bundled services that include delivery, spreading, and compaction; availability depends on the contractor and the job size. Typical rates vary: driver tailgate spreading may be offered at no charge or a small fee for simple jobs, while dedicated spreading and compacting crews or machines commonly start in the range of $40 to $100+ per hour for labor and equipment; small jobs may be quoted per ton or per project instead. Ask Hello Gravel to coordinate a bundled quote or request local contractor recommendations and written estimates before booking.

Specify the type of fill you need (screened/clean vs. native fill), include site access details and any obstacles in Order Notes, and confirm minimum order quantities and delivery fees for your zip code. Ask for material photos or a sample if color or composition matters, request tailgate spreading at checkout if you want it (driver will assess on arrival), and plan for compaction and drainage work after delivery; contacting the City of Harlingen Building Department for permit or elevation guidance is also a good step.