Gravel delivery in Hallettsville, TX

Material and delivery costs vary by stone type, supplier, and distance. Expect common gravels (crushed limestone, #57, pea gravel) to range roughly $20 to $45 per ton for material, with delivery typically $50 to $150 for local hauls in the Hallettsville/Lavaca County area. Hello Gravel has a 3-ton minimum on orders and shows exact pricing for your zip code at checkout; larger jobs usually lower the per-ton delivered cost.

Locally sourced crushed limestone is the most common option around Hallettsville, along with #57 stone, pea gravel, and river rock depending on the supplier. In some West Texas suppliers you may also see caliche or decomposed granite; availability depends on local quarries and the regional geology, so check the material photos and descriptions for your delivery area.

Hello Gravel connects you with vetted local suppliers and contracted haulers that serve Hallettsville and surrounding towns. If you prefer to contact suppliers directly, check Lavaca County listings and regional aggregate suppliers; otherwise enter your zip code on our site and we will show local options, pricing, and scheduled delivery windows.

For a typical residential driveway plan on 3 to 6 inches of compacted gravel (4 inches is common for light passenger use), while heavier-use driveways and ranch roads benefit from 6 to 12 inches with a compacted base. Installed gravel typically runs about $0.75 to $2.00 per square foot depending on depth, stone type, and grading work; contractors doing full base prep, geotextile, and compaction will be at the higher end of that range.

Gravel itself tolerates heat well, but hot, dry weather and clay subsoils can cause dust, rutting, and poor drainage if the base is not prepared. Use a compacted stone base, proper crown for runoff, optional geotextile fabric, and periodic regrading and top-ups to manage dust and ruts on clay. For ranch roads, consider thicker sections and drainage features like culverts to reduce washouts after storms.

Measure area in square feet and desired depth in inches, then use: cubic yards = (square feet * depth in inches) / 324. Multiply cubic yards by about 1.4 to get tons (1 cubic yard of gravel ≈ 1.4 tons). Example: a 20x20 ft driveway at 4 inches needs roughly (400*4)/324 = 4.9 cubic yards, or about 7 tons; Hello Gravel's material calculator can compute this automatically for your zip code.

Local rules vary: city, county, and any HOA may have requirements for driveway entrances, culverts, or surfacing standards. For rural driveways that tie into county roads contact Lavaca County Road & Bridge or the city public works for guidance on permits and culvert requirements, and check with your HOA if you have one. It is best to confirm before ordering material to avoid rework or noncompliance.

Gravel is usually the lowest upfront cost, easy to install, and simple to repair—advantages for farm roads, rural driveways, and low-traffic properties in the Hallettsville area. Asphalt and concrete cost more initially (rough ranges: gravel $0.75-$2.00/sq ft installed, asphalt $3-$7, concrete $4-$10) but require less frequent topping and may be preferable for higher-traffic driveways. Consider budget, maintenance willingness, drainage, and local soil: on expansive clay, a well-built gravel base with good drainage is often the most practical option.

Make sure the delivery area is accessible for a tri-axle dump truck, with 12 to 15 feet of clear width and room to turn and back up; note overhead lines, low branches, gates, and soft ground in your order notes. Request tailgate spreading at checkout if you want the driver to spread material, but understand this is at the driver's discretion; for best results do final grading and compaction after delivery and plan for periodic top-ups.