Fill Dirt delivery in Fulton, TX

Fill dirt is mostly fine-grained soil with few rocks or organic materials. In Fulton and other West Texas locations it is commonly used for raising or leveling yard and building grades, backfilling foundations, and filling low spots where vegetation or drainage is not the priority. Because local materials vary, color and texture may differ by supplier.

Prices vary by supplier and delivery distance, but expect roughly $15 to $40 per ton delivered in many West Texas areas; that equates to about $12 to $30 per cubic yard depending on density. Exact pricing depends on availability, delivery fees, and moisture content, so we recommend using Hello Gravel to get an instant local quote for your zip code.

Hello Gravel connects you with local suppliers and haulers that serve Fulton; minimum orders typically start at 3 tons because deliveries use dump trucks. Supplier options, exact delivery zones, and minimums vary by town and carrier, so enter your address on Hello Gravel or call our team to see which local providers can deliver to your property.

To raise 1,000 sq ft by 4 inches you need about 12 to 13 cubic yards of material, which converts to roughly 15 to 17 tons of fill dirt depending on moisture and compaction. We recommend ordering 5 to 10 percent extra to allow for settling and compaction, so plan on about 16 to 19 tons for most West Texas conditions.

Fill dirt is fine for raising and rough grading but is not ideal as the finished base for driveways or pads. For long-term stability in Fulton s hot, arid climate you should use road base or crusher run compacted to grade, then top with the wearing surface; fill dirt can be used below those layers as subgrade if properly compacted and free of organics.

Fill dirt can compact well if it is free of organic matter, but clay-heavy native soils in West Texas can hold water and lose strength when wet. For areas with poor drainage we recommend using geotextile fabric to separate soft subgrade from fill, well-graded base material over the fill, and mechanical compaction; consider soil stabilization (lime or cement) for very clayey or weak subgrades after a soils recommendation.

Delivery fees vary by distance, truck configuration, and site access; Hello Gravel often offers free delivery in many areas but remote or hard-to-reach properties can incur extra charges. Typical access needs include a clear 12 to 14 foot turning width for tri-axle trucks, a stable driveway surface, and gate clearance; provide photos and notes at checkout so suppliers can confirm access and fees before dispatch.

If fill dirt is used as a compacted subgrade below proper base and surface layers, it will last many years with little maintenance. If used as an exposed surface, expect more frequent maintenance: erosion, settling, and dust mean you may need to add material or regrade every 1 to 5 years depending on traffic and weather.

Permit and HOA requirements vary locally; small grade changes and normal driveway repairs often do not need permits, but significant grading, lot elevation changes, or anything that impacts drainage may require county permits or HOA approval. Check with your county building or permitting office and any homeowners association before ordering large quantities, and contact Hello Gravel if you need help documenting quantities for permit applications.

For exposed fill dirt surfaces, keep a regular schedule of grading to maintain slope and drain, add 1 to 2 inches of material annually or after heavy storms, and apply dust-control measures such as watering, magnesium chloride, or stabilizers for high-traffic areas. For fill used as subgrade, ensure surface drains, do not expose the subgrade to prolonged erosion, and cover with appropriate base and surfacing to minimize future maintenance.

Fill dirt is best for bulk elevation changes and backfill but performs poorly as a surface for erosion control because it erodes and compacts unevenly. Decomposed granite and crushed limestone are better choices for surface stabilization, walkways, and erosion control in West Texas because they shed water, compact to a stable wearing surface, and look finished; use fill dirt only where you plan to overlay it with a suitable surface layer.