Gravel delivery in Floresville, TX

In Floresville you can expect delivered gravel prices to vary by material and supplier; a common range is about $20 to $45 per ton and roughly $30 to $60 per cubic yard. Delivery fees or minimums can change the final price, and Hello Gravel has a 3-ton minimum on orders in many areas. For an exact price for your zip code and material type, get a quote through Hello Gravel or ask for a delivery estimate that includes placement.

For West Texas heat and occasional heavy rains, crushed limestone and crushed rock are the most common choices because they compact well and resist rutting. Decomposed granite can be a good, natural-looking option for low-traffic areas, while pea gravel is better for decorative or walking areas rather than main drive lanes. Consider local dust, drainage and how much traffic you expect when choosing the size and type.

Use this quick method: area (sq ft) x depth (in) / 324 = cubic yards, then multiply by about 1.4 to get tons. Typical estimates: a 12x50 driveway (600 sq ft) needs about 8 tons for a 3u0022 top layer or about 16 tons if you want a 6u0022 compacted base. A 20x30 patio (600 sq ft) needs roughly 6 to 12 tons depending on 2u0022 finish vs 4u0022 base, and a 12x40 RV pad (480 sq ft) usually needs about 8 to 12 tons at 4u0022 depth.

Hello Gravel connects you with local suppliers and hauling fleets serving Floresville and surrounding Wilson County; specific quarry names vary by order and location. Standard delivery through our network is 2+ business days, and next-day delivery is often available for orders placed before noon CST (additional fee applies). Larger orders or specialty materials may require extra lead time, so check your delivery window at checkout or call our team.

Gravel driveways in Floresville hold up well if properly installed with a compacted base and good drainage, but they will need periodic maintenance. Expect to regrade, add fresh gravel, and refill low spots every 1 to 4 years depending on traffic, rains and dust control. Installing a geotextile and proper slopes to move water away will reduce erosion and maintenance needs.

Gravel has the lowest upfront cost and is fast to install, while asphalt and concrete cost more but typically last longer with less regular upkeep. Expect gravel to be the most economical short-term option, asphalt mid-range, and concrete the highest upfront cost with the longest lifespan. Your choice should factor in budget, appearance, drainage and how much ongoing maintenance you want.

Contractors commonly recommend a compacted base of 4 to 6 inches for most residential driveways and 6 to 8 inches for heavier loads like RVs and equipment. Add a 2 to 3 inch finish layer of 3/4u0022 minus or similar material that compacts well, and use mechanical compaction (plate compactor or roller) for best results. On soft or clay soils, a geotextile fabric and thicker base are recommended to improve drainage and stability.

Recycled crushed concrete is often available through our local supplier network and can be a cost-effective choice, typically 10% to 30% cheaper than virgin aggregate. It works well as a base material and provides good compaction, though it can contain more fines and vary in color and drainage. For finished surfaces you may prefer virgin crushed stone for consistent appearance and drainage performance.

Permit and HOA rules vary by neighborhood and whether you are in city limits or unincorporated Wilson County; some areas have restrictions on driveway materials or placement. Check with the City of Floresville building department and your HOA before installing a new gravel driveway to confirm setback, drainage and impervious surface rules. If in doubt, contact Hello Gravel and your local permitting office for guidance before ordering.

Full professional installation costs depend on site prep and materials, but a typical range in the Floresville area is about $1.50 to $4.50 per sq ft for grading, base prep, geotextile and compacted top material. For a 12x50 driveway (600 sq ft) that translates to roughly $900 to $2,700 including materials and labor, though prices vary by contractor and job complexity. For a detailed quote, request an on-site estimate or get a bundled delivery-plus-install from local contractors through Hello Gravel.

Provide clear drop location notes at checkout and include any access details like gate codes, overhead clearances, or hard-to-find addresses so drivers can place material safely. You can request tailgate spreading at checkout, but drivers perform spreading at their discretion for safety and they may not guarantee spreading. Remember Hello Gravel deliveries are usually by contracted tri-axle dump truck and a tight access or obstacles can affect placement and any spreading options.