Gravel delivery in Falfurrias, TX

In West Texas, gravel prices usually range from about $12 to $35 per ton depending on type (washed, crushed, decorative), local supply, and distance from the quarry. Hello Gravel has a 3-ton minimum order and delivery fees vary by zip code and truck access; get an exact quote by entering your Falfurrias zip code on our site or contacting our team.

For Falfurrias and other West Texas locations, crushed limestone or #57 stone are the most common choices because they lock together and drain well. Decomposed granite works for a softer, more finished look on low-traffic areas, while river rock is less ideal for driveways because it does not compact tightly.

Gravel density varies, but a good rule of thumb is about 1.3 to 1.6 tons per cubic yard; many people use 1.4 tons per cubic yard as a practical estimate for crushed stone. Use the higher end for heavier, denser materials and the lower end for lighter or very coarse rock when calculating your order.

Hello Gravel works with local suppliers and haulers that service Falfurrias; typical minimums for delivery in the area are 3 tons, which matches our platform minimum. Delivery is usually by tri-axle dump truck; check the delivery notes at checkout for truck access, tailgate spreading requests, and any additional local fees.

Permit rules can vary: you may need a permit if you alter a county road, change a driveway apron, or tie into a public right-of-way, so check with Brooks County or the City of Falfurrias before starting work. Regardless of permits, plan proper drainage (swales, culverts, or grading away from structures) to prevent washouts during heavy rains common in the region.

Heat and dry spells increase dust while occasional heavy rains can wash fines and create ruts, so choose a material that balances drainage and stability, such as angular crushed stone with some fines or a stabilized mix. Regular maintenance—periodic regrading, topping up low spots after storms, and maintaining slope—helps the surface last longer in local conditions.

For a typical residential driveway expect to install and compact a 4 to 6 inch finished layer of gravel over a prepared subgrade; for regular vehicle use, a 6 to 8 inch compacted base (installed in 3- to 4-inch lifts) is common. For heavier use like agricultural trucks or rural roads, plan 8 to 12 inches of compacted base and consider geotextile fabric on very soft soils.

DIY can save money on labor if you have time and access to equipment (pickup delivery, plate compactor or roller), but expect equipment rental and extra effort for grading and compaction. A contractor adds cost for labor and mobilization but usually delivers properly graded, compacted work faster; request quotes from both and include equipment rental, delivery, and your time when comparing costs.

Washed, clean stone such as 3/4u0022 crushed stone or #57 clean stone is typically recommended for drainage under slabs and around foundations, because it drains well and resists settling. For septic drain fields follow local health department specifications; using angular, washed stone and a separating geotextile fabric helps keep fine soils from clogging drainage.

Multiply the area (feet) by the desired depth (feet) to get cubic feet, divide by 27 to convert to cubic yards, then multiply by about 1.4 to convert cubic yards to tons. For example, a 10 ft by 20 ft area at 3 inches deep is 10*20*(3/12)=50 cubic feet, which is 50/27=1.85 cubic yards, or roughly 1.85*1.4=2.6 tons.