Fill Dirt in Crosby, TX

Prices vary by supplier, distance, and material quality, but most homeowners in the Crosby area see fill dirt quoted as a per-cubic-yard or per-ton rate. Expect suppliers to give a local price quote when you enter your zip code; Hello Gravel lets you check availability and get an exact price online or by calling our sales team.

Hello Gravel commonly delivers with tri-axle dump trucks that carry roughly 10 to 12 cubic yards of loose fill dirt (capacity varies by truck type and local supplier). Cost for one load is the local price per cubic yard times the truck capacity plus any delivery fee; use the calculator on our site or request a quote for a precise per-load price.

Hello Gravel has a minimum order equivalent to about 3 tons and standard delivery lead time of 2+ business days in many areas, with next-day delivery available for orders placed before noon CST for an extra fee. Delivery fees depend on supplier distance and access; in many zip codes delivery is free, but your checkout will show any fees before you pay.

Some local suppliers and partner contractors offer compaction and light grading, but this service is offered at the contractor's or driver's discretion and is not guaranteed. Expect compaction/grading to range widely depending on area and equipment—small residential jobs commonly run from a few hundred to over a thousand dollars—so ask for a separate quote for compaction when you order.

Fill dirt is subsoil intended for building up grades and filling voids; it is usually lower in organic matter and nutrients than topsoil and is cheaper as a result. For leveling lawns or gardens in Crosby you can use fill dirt to raise grades, but add 4 to 6 inches of quality topsoil or compost on top before planting or seeding for healthy turf and plants.

Drainage depends on the native soil: parts of West Texas around Crosby can have heavier clays that hold water, while sandy spots drain faster; compacted fill dirt will drain slowly. Consider adding sand or coarse gravel, installing a French drain, or creating swales in areas that pond after rain; consult a contractor if water collects or if you plan to raise grades near foundations.

Use the formula cubic yards = (length ft x width ft x depth ft) / 27, or the shortcut cubic yards = (L x W x depth in inches) / 324. For a 50 x 100 ft area raised 2 inches: 50 x 100 x 2 / 324 = about 31 cubic yards of fill dirt. Hello Gravel's online calculator and sales team can double-check your measurements if you enter your project dimensions.

Typical fill dirt lacks the organic material and nutrients grass and garden plants need, so you should place several inches (usually 4 to 6 inches) of topsoil or amended soil on top before seeding or planting. For small touch-ups or temporary cover, you can seed on fill dirt, but long-term lawn health will be better with a topsoil layer.

Fill dirt can be used to build up the subgrade under a driveway, but it is not a wearing surface; gravel or crushed stone is needed on top to form the driveway surface. Two inches of any material is too thin for a driveway; typical gravel driveways require at least 3 to 6 inches of compacted base material over a properly prepared subgrade for residential use.

Common stabilization measures include thorough compaction with a plate compactor or roller, installing geotextile fabric under fill in soft areas, and blending the soil with sand or crushed stone to improve stability and drainage. Suppliers may supply materials like geotextile or coordinate with contractors, but most stabilization and long-term grading work is performed by landscapers or site contractors.

One cubic yard is a 3 ft x 3 ft x 3 ft pile—easy to visualize in your yard. One ton of fill dirt typically equals about 0.7 to 1.4 cubic yards, depending on moisture and compaction; conversely one cubic yard commonly weighs about 1.1 to 1.3 tons. A typical tri-axle dump truck used locally carries around 10 to 12 cubic yards, so expect roughly 12 to 16 tons per load depending on material density.

Prepare the site by marking and protecting utilities, removing vegetation and debris where possible, mowing tall grass, and ensuring a clear access path for the dump truck. Most suppliers deliver material but do not perform extensive site prep; ask at checkout if your supplier or a partner contractor can arrange additional prep or erosion control services.