Gravel in Bullard, TX

Expect regional ranges rather than exact prices: crushed limestone often runs about $20 to $45 per ton, pea gravel $30 to $60 per ton, and river rock $40 to $80 per ton. One cubic yard of loose gravel is roughly 1.3 to 1.5 tons (use 1.4 tons/yd3 as a rule of thumb), so convert prices accordingly. Local supplier availability, color, and delivery distance can push prices up or down, so check your zip code in our checkout for firm pricing.

Suppliers commonly offer crushed limestone (including 3/4u0022 and #57), pea gravel, river rock, and crusher fines. For driveways in Bullard, crushed 3/4u0022 or #57 stone is usually best because it compacts and locks together; pea gravel is better for patios and decorative areas but can roll under tires; river rock is ideal for dry creek beds and drainage features. Regional variations apply, so ask for local photos or samples if color and texture matter.

Hello Gravel has a minimum order of 3 tons and standard delivery is typically 2+ business days with no extra fee in many areas. Next-day delivery is often available for orders placed before noon CST for an additional fee, and remote or long off-road drops may incur extra charges. Drivers may offer tailgate spreading at their discretion; request it at checkout and note that safety and access determine whether it can be done.

Use area x depth / 27 to get cubic yards, then multiply by about 1.4 to estimate tons. Example: a single-car 10' x 20' at 3u0022 depth = ~1.85 cy (~2.6 tons); the same area at 4u0022 = ~2.47 cy (~3.5 tons). For a two-car 20' x 20' at 4u0022 expect ~4.9 cy (~6.9 tons). Always order 10-20% extra to account for compaction, grading, and waste.

Angular crushed stone (like crushed limestone or #57) compacts well and resists washouts better than round pea gravel; larger stone (1u0022+) works well in drainage trenches. Given Bullard’s occasional heavy rains and clay subsoils, build a firm compacted base, use geotextile fabric to separate the clay, and install proper slope and drainage to avoid washouts. For surface areas prone to runoff, consider a thicker base and edge restraints to hold material in place.

Expect light maintenance like raking and minor topping every year, and regrading or adding fresh stone every 1 to 3 years depending on traffic and weather. Typical small top-ups of 0.5u0022 to 1u0022 of stone cost a few hundred dollars delivered for most homeowners; full resurfacing or deeper regrades are more significant. Prevent weeds with landscape fabric and pre-emergent, and repair ruts after heavy rains to extend longevity.

Gravel has the lowest initial cost and easiest DIY installation but requires more frequent maintenance and topping. Asphalt is mid-range in cost with moderate maintenance and typically lasts 15 to 25 years; concrete has higher upfront cost and long life with low routine maintenance. In Bullard, drainage and grading are critical for all three; gravel handles high heat without softening but needs good base work to prevent washouts in heavy rain.

Regulations vary by lot, subdivision, and HOA. Bullard city ordinances and many HOAs have rules on driveway openings, curb cuts, and stormwater runoff, and some HOAs restrict front-yard rock or gravel landscaping. Always check your HOA covenants and call Bullard city planning or building department before installing large gravel areas to confirm requirements.

Start with a compacted subgrade, then 3/4u0022 crushed stone for a structural base, and finish with a wearing course like 3/8u0022 to 3/4u0022 crushed stone or crusher fines. Use geotextile fabric to separate clay subsoil from aggregates and consider edge restraints to keep material contained. For higher-traffic areas, products like polymeric binders or gravel stabilizers can reduce movement, though they add cost and may change appearance.

Yes — Hello Gravel connects you with local suppliers and contracted haulers in your area so you get locally sourced material and coordinated delivery. Typical lead times are 2 to 7 business days for common quantities; very large or special-order colors/rock types can take 1 to 2 weeks. Enter your zip code for firm pricing and estimated delivery windows.

Clear a defined drop zone and remove vehicles or obstacles from the driveway; mark underground utilities and any obstacles with flags. If access is narrow, soft, or through private property, notify us in Order Notes and consider a smaller truck or different drop location; the driver will assess safety on arrival. Request tailgate spreading at checkout if you want the driver to attempt spreading, but remember this service is at the driver's discretion.

A practical conversion is 1 cubic yard = about 1.3 to 1.5 tons depending on rock type and moisture; use 1.4 tons/yd3 as a conservative estimate for crushed stone. To calculate: area (sq ft) x depth (ft) / 27 = cubic yards, then multiply by 1.4 for tons. Add about 10-20% extra for compaction, grading, and waste when placing your order.