Fill Dirt delivery in Benbrook, TX

Fill dirt is subsoil with minimal organic matter used to raise grade, fill holes, and build terraces or swales. In Benbrook it is commonly used to level yards, raise low spots for drainage, backfill foundations, and prepare sites before installing driveways or landscaping. It is not intended as finished topsoil, so you should plan to add topsoil or a structural base if you need planting or a durable driving surface.

Material prices for fill dirt in Benbrook commonly range from about $8 to $25 per ton, depending on source and quality. Delivered, the all-in cost per ton usually falls between $20 and $45 once delivery fees and minimums are included; final price depends on distance, truck access, and supplier. Ask for an itemized quote from Hello Gravel for an exact delivered price to your zip code.

Hello Gravel's minimum order is 3 tons, which is typical for online aggregate orders. Local haulers in West Texas commonly use tri-axle dump trucks (roughly 10–16 cubic yards) and smaller 6–8 yard trucks for tight residential jobs; in tons that usually equals about 6–18 tons of fill dirt per truck depending on density. If you only need a few cubic yards, ask about partial loads or shared deliveries when you order.

Benbrook’s clay soils can hold moisture and expand or shrink seasonally, which makes uncompacted fill likely to settle or shift. Proper preparation—including staged placement, compaction, and using well-graded fill dirt—reduces settlement and improves stability; avoid placing loose fill against foundations without proper compaction and drainage. For landscaping, cap fill dirt with several inches of topsoil and mulch to support plant growth in drought-prone conditions.

Common extra fees include delivery distance or fuel surcharges, residential delivery or curbside access fees, and optional tailgate spreading or offload charges. Some suppliers also charge to dispose of debris or for access restrictions (gates, narrow driveways), and next-day delivery usually has an additional fee. Ask Hello Gravel for a full breakdown before confirming your order so you know which fees apply to your property.

Possibly. City permits may be required if your project changes drainage, impacts a right-of-way, or involves large earthwork; Benbrook ordinances vary by project type so check with the city’s permitting office for site-specific rules. Many HOAs in Benbrook also have covenants about front-yard appearance and allowed materials, so review your HOA guidelines or get approval before bringing in large amounts of bare fill dirt for visible areas.

Use this simple formula: Tons = area(ft2) * depth(in) / 324 * 1.2, where 1.2 is a typical tons-per-cubic-yard estimate for fill dirt. Example conversions using that density: 1,000 sq ft at 1u0022 ≈ 3.7 tons; 500 sq ft at 4u0022 ≈ 7.4 tons; 2,000 sq ft at 6u0022 ≈ 44.4 tons. These are approximations — increase your estimate 10–20% for compaction and to allow for uneven spreading, or ask Hello Gravel to calculate based on local material density.

Fill dirt is intended to add volume or raise grade and is not a durable wearing surface for driveways; it will settle and rut under vehicle traffic. Crushed limestone or road base are engineered for driveway use and hold up much better in Benbrook’s clay and drought cycles, requiring less ongoing maintenance and providing better drainage when properly installed and compacted. If you plan a driveway, use fill dirt only for leveling subgrade, then cap with a road base or crushed stone designed for traffic.

Contractor rates vary, but expect labor and light equipment (skid steer or small bobcat) for spreading to run roughly $40–$100 per hour, with compacting (plate compactor or roller) often billed at a similar hourly rate or included in a flat per-project price. Some contractors charge per ton or per cubic yard for spreading and compaction—common ranges are $1–$5 per ton for basic compaction work depending on scope and access. Always get written quotes that list materials, spreading, compaction, and any site prep separately.

Clear the dump area of cars, low branches, and obstacles and mark the preferred drop spot with stakes or flags; provide clear access instructions in your order notes. Confirm where trucks can safely offload, request tailgate spreading if desired (driver discretion), and arrange any permits or HOA approvals in advance; this reduces extra trips or fees and helps the delivery go smoothly.